Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Programming KOMBI and NBT fails on F series
17-11-2015, 11:01 AM,
Post: #51
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Dear:
I am sure only a rounter need to be connected in the middle of the ICOM and laptop by LAN cable.don't need any setting up. but why is not valid by Wireless from rounter to laptop?do you have any idea?thx. (16-11-2015, 23:42 PM)Fx82 Wrote: Just add a router and connect the icom to it and offcourse your laptop to the router. |
|||
18-11-2015, 05:44 AM,
Post: #52
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Because ista P does not support wlan connections. Probably due to stability liability.
|
|||
18-11-2015, 06:45 AM,
Post: #53
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
What is the latest version that works fine with KOMBI and NBT?
|
|||
18-11-2015, 11:53 AM,
Post: #54
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
IT is still not fixed
|
|||
18-11-2015, 12:22 PM,
Post: #55
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Newer had problem in F series with this issue
don't know why you so scare my icom is connected without any router |
|||
18-11-2015, 12:25 PM,
(This post was last modified: 18-11-2015, 12:28 PM by Fx82.)
Post: #56
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Are you using an A1 or A2?
(17-11-2015, 11:01 AM)winter Wrote: Dear: Why connect through dhcp if you aren't using dhcp? Ista-p requires cable connected. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
18-11-2015, 12:37 PM,
Post: #57
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Yes,I know your mean,but ISTA/P support WLAN connection from rounter to laptop for programming,so my question is What's different LAN cable connection than WLAN from rounter to PC?
(18-11-2015, 05:44 AM)SweetBMW Wrote: Because ista P does not support wlan connections. Probably due to stability liability. |
|||
18-11-2015, 13:45 PM,
Post: #58
|
|||
|
|||
Programming KOMBI and NBT fails on F series
(18-11-2015, 12:37 PM)winter Wrote: Yes,I know your mean,but ISTA/P support WLAN connection from rounter to laptop for programming,so my question is What's different LAN cable connection than WLAN from rounter to PC? Ista p does not support wifi (wlan) and will not start ista p server if the wifi is enabled on the laptop, only ista p client will open and you cannot select istap server to program. Imagine if the wifi connection drops during programming then the car is screwed up. There are good reasons why bmw doesn't allow programming via wifi |
|||
18-11-2015, 19:01 PM,
Post: #59
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Exactly ista-p doesn't support wifi.
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
26-12-2015, 12:57 PM,
(This post was last modified: 26-12-2015, 12:57 PM by winter.)
Post: #60
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Hi:
Who have a method to DHCPSVR configurate with ENET cable to programming MOST modules?ICOM can do it,but with ENET cable ZGW search couldn't find IP,ISTA P couldn't identificate VIN.thanks in advance. Hi: Who have a method to DHCPSVR configurate with ENET cable to programming MOST modules?ICOM can do it,but with ENET cable ZGW search couldn't find IP,ISTA P couldn't identificate VIN.thanks in advance. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
7 Guest(s)
7 Guest(s)
Return to TopReturn to Content