Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT
|
19-01-2016, 19:55 PM,
Post: #1
|
|||
|
|||
Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT
Dear friends,
unfortunely i am not able to set up K+DCAN clone cable with INPA EDIABAS and NCS EXPERT. Trust me..i tried everything but it was not possible... So now i would like to make coding on NCSEXPERT with a genuine ICOM. Do you have/know a guide to set up ICOM with EDIABAS? Thank you friends |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
19-01-2016, 20:42 PM,
Post: #2
|
|||
|
|||
|
RE: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT
Hello , use itoolradar
http://cartechnology.co.uk/showthread.ph...itoolradar |
|||
|
|
|
19-01-2016, 20:49 PM,
Post: #3
|
|||
|
|||
|
RE: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT
Use itool radar with easy connect and copy the ip from icom from itool radar in easy conect.
Than in easy connect setting: Remote ip copy obd_625 icom lock check now u can use icom with ncs inpa..... |
|||
|
|
|
19-01-2016, 20:59 PM,
Post: #4
|
|||
|
|||
|
RE: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT
Ok but will icom still genuine working with ista D/P?
how can check icom lock? thank you |
|||
|
|
|
19-01-2016, 21:20 PM,
Post: #5
|
|||
|
|||
RE: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT
(19-01-2016, 20:59 PM)brunocortona Wrote: Ok but will icom still genuine working with ista D/P? Icom genuine work for ista D/P Icom lock or unlock you see in Itool Radar THX and REP will be nice
 |
|||
|
|
|
20-01-2016, 12:56 PM,
Post: #6
|
|||
|
|||
|
RE: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT
Will it work with DCAN protocol? i need it to coding R60.
I read about ediabas.ini configure REMOTE:MOST (To use MOST) REMOTE: DiagBus (To use DiagBus) Which i need to setup? |
|||
|
|
|
20-01-2016, 13:45 PM,
Post: #7
|
|||
|
|||
RE: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT
(20-01-2016, 12:56 PM)brunocortona Wrote: Will it work with DCAN protocol? i need it to coding R60. obd_625 Please, Press the Buttons
![[Image: postbit_thx.gif]](http://cartechnology.co.uk/images/CarTechnologyTheCure/english/postbit_thx.gif) and ![[Image: postbit_reputation.gif]](http://cartechnology.co.uk/images/CarTechnologyTheCure/english/postbit_reputation.gif) if This post help or is usefull for you! Not is needed write just only thanks in Threads |
|||
|
|
|
20-01-2016, 16:16 PM,
Post: #8
|
|||
|
|||
|
RE: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT
In easy connect i have not old_625.
i can find OBD_ab625 it is this that you mean? |
|||
|
|
|
20-01-2016, 18:11 PM,
Post: #9
|
|||
|
|||
|
RE: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT
Where can i find easy connect?
regards
 |
|||
|
|
|
20-01-2016, 20:51 PM,
(This post was last modified: 20-01-2016, 20:55 PM by Sabreace.)
Post: #10
|
|||
|
|||
RE: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT
(20-01-2016, 16:16 PM)brunocortona Wrote: In easy connect i have not old_625. Yes that's the right one I think you have (m)any Problems http://cartechnology.co.uk/showthread.php?tid=12789 (20-01-2016, 18:11 PM)bernd79 Wrote: Where can i find easy connect? http://cartechnology.co.uk/showthread.ph...asyconnect THX and REP will be nice
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
