[jaramillo]

Hi everyone,

Im facing a connection problem with ista D on a F56 JCW

Every time I try to identify the car an error prompts:

"The vehicle could not be identified. Please check the access to the vehicle and check whether the testing-analysis-diagnosis has been activated"


Its Important to mention that Ista P 3.58 works flawless
In Ista D KL15-30 are shown but no identification happens.

Settings:
Icom A2
IstaD tested versions 3.52 - 3.53 - 3.54
W10
Firewall dissabled


Im enclosing a file that contains some pictures.

Thanks in advance!!

[jaramillo]

Any ideas?
Thanks in advance

[CarT01]

Which version of ISTA/D you use?

[jaramillo]

Which version of ISTA/D you use?

Right now I have installed 3.52. But also I have 3.53 and 3.54 standalone versions.

[CarT01]

And in all versions same issue?

[SweetBMW]

Does the icom work on other cars?

[jaramillo]

And in all versions same issue?

Yes thats right. But ista P works without problem into that car.
I have tried with a Enet cable also but same result

---

Does the icom work on other cars?

Yes, it works without problems. The problem started yesterday.

[CarT01]

And in all versions same issue?

Yes thats right. But ista P works without problem into that car.
I have tried with a Enet cable also but same result

Which settings in EDIABAS?

REMOTE:IP?

Do you use EasyConnect? Try, Remote - IP - Base and unlock the ICOM, check status with IToolRadar.

All Antivirus off, firewall off?

Check connection via esys, reserved icom.

[jaramillo]

And in all versions same issue?

Yes thats right. But ista P works without problem into that car.
I have tried with a Enet cable also but same result

Which settings in EDIABAS?

REMOTE:IP?

Do you use EasyConnect? Try, Remote - IP - Base and unlock the ICOM, check status with IToolRadar.

All Antivirus off, firewall off?

Check connection via esys, reserved icom.

I use I tool radar to enssure that the Icom is free.
Antivirus and firewall off

Here is my VCI config. As you can see I dont use ediabas.ini file

[CarT01]

Try with uncheck box ethernet as preferred communication...
and try to check box HO-ICOM /ENET local and ISIS Network

What changes before the issue?