Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Programming KOMBI and NBT fails on F series
15-04-2016, 14:44 PM,
Post: #91
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Today I tried it again with Router. I connected Notebook and Enet Cable to Router. DHCP on the router was enabled.
But still no success. ZGW Search cannot find the car. So I think it is not possible to flash NBT with ENET Cable and ISTA P. |
|||
15-04-2016, 15:34 PM,
Post: #92
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
I'm not sure but i read about an error with Windows 10 and ISTA/P flashing ZGW.
I will have a look if that is exactly the fact. |
|||
15-04-2016, 15:38 PM,
Post: #93
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
I don´t think there is an error with Winows 10.
ZGW Search can find the car when I do not use a Router or DHCP Server. And the problem is not flashing ZGW Module. It is flashing NBT |
|||
15-04-2016, 16:28 PM,
Post: #94
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Try to use the DHCP Tool and set the fix IP in Windows to 169.254.1.1 and use the same IP in the DHCP Tool.
Looks like 169.254.1.1 - 255 That worked for me to make the Car visible in ZGW Search and should work with the DHCP Server too. But there is an official Problem with Windows 10 and ISTA/P Code: Important! |
|||
15-04-2016, 17:05 PM,
Post: #95
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
What do you mean with DHCP Tool? This one http://www.dhcpserver.de/ ?
|
|||
15-04-2016, 17:11 PM,
Post: #96
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Yes, try DHCPServer. As i said, that worked for me connecting to the car.
|
|||
15-04-2016, 17:14 PM,
Post: #97
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
I already tried it with DHCPServer. But it doesn´t work for me.
This config: [SETTINGS] IPPOOL_1=169.254.1.1-255 IPBIND_1=169.254.1.1 AssociateBindsToPools=1 Trace=0 DeleteOnRelease=0 ExpiredLeaseTimeout=3600 [GENERAL] LEASETIME=86400 NODETYPE=8 SUBNETMASK=255.255.255.0 NEXTSERVER=169.254.1.1 ROUTER_0=0.0.0.0 |
|||
15-04-2016, 17:20 PM,
Post: #98
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Still no Connection in ZGW Search?
|
|||
15-04-2016, 17:21 PM,
Post: #99
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
No. With DHCPServer on or Router ZGW Search can not find my car.
What is your config? |
|||
15-04-2016, 18:00 PM,
Post: #100
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Conact me in Skype.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content