Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Need help setting up j2534 with ista
13-05-2016, 01:15 AM,
Post: #1
|
|||
|
|||
Need help setting up j2534 with ista
Broke my icom and waiting for replacement and need help setting up my j2534 launch box to make it work for now. Can't figure it out, nothing works can someone help via TeamViewer, can pay paypal. Thx.
Sent from my HTC One_M8 using Tapatalk |
|||
13-05-2016, 01:40 AM,
Post: #2
|
|||
|
|||
RE: Need help setting up j2534 with ista
(13-05-2016, 01:15 AM)nymike Wrote: Broke my icom and waiting for replacement and need help setting up my j2534 launch box to make it work for now. Can't figure it out, nothing works can someone help via TeamViewer, can pay paypal. Thx. This was from someone else (sweetsam I think). I don't remember who but it works. in ediabas.ini interface must be changed to "pasthrud" 1- Rheingold system installed 2- BMW standerd tool 2.12 3- every passthru tool comes with its drivers cd 4- pttbmw v xxx im using v2.1 5- ediabas configuration tool after complete step 1 start install bmw standerd tool 2.12 with check box ,inpa ediabas , ncexpert ,winkfp, choose std:obd for hardware for interface ,com 9 for com port , finish and restart pc ,now after restarting pc you have to install you tool drivers (passthur) , then install pttbmw vxxx (i prefer v2.1) open start>all program>bmw passthrud >passthrud configration and select your tool from the list check in k-line support for 115200bps press launch confing tool complete by pressing ok , now open program file >bmw ag >passthrud > make copy for all files in this folder exept ediabas.bin file and paste in c:\ediabas\bin\replace all files with the copy you made , use ediabas configration tool to chanege from std:obd to passthrud , start Rheingold and open setting select vci config select EDIABAS STANDARD SITTING and close setting , work done . this system now ready to work with bmw cars with one tool using inpa,ncsexpert tool ,winkfp and bmw Rheingold (ISTA-D) |
|||
13-05-2016, 01:40 AM,
Post: #3
|
|||
|
|||
RE: Need help setting up j2534 with ista
I saw it, followed and not working.
Sent from my HTC One_M8 using Tapatalk |
|||
13-05-2016, 01:41 AM,
(This post was last modified: 13-05-2016, 01:49 AM by eautocheck.)
Post: #4
|
|||
|
|||
RE: Need help setting up j2534 with ista
Edited since it did not help. Works for me but I do not know what steps you followed and I don't use teamviewer
|
|||
13-05-2016, 02:22 AM,
Post: #5
|
|||
|
|||
Need help setting up j2534 with ista
Did as u posted but still no communication with the car.
Sent from my HTC One_M8 using Tapatalk |
|||
23-06-2019, 12:07 PM,
Post: #6
|
|||
|
|||
RE: Need help setting up j2534 with ista
K
(13-05-2016, 01:40 AM)eautocheck Wrote:(13-05-2016, 01:15 AM)nymike Wrote: Broke my icom and waiting for replacement and need help setting up my j2534 launch box to make it work for now. Can't figure it out, nothing works can someone help via TeamViewer, can pay paypal. Thx. (13-05-2016, 02:22 AM)nymike Wrote: Did as u posted but still no communication with the car. Pulling up this old trend. Did you get the J2534 passthrud working gents? Can you give us all an update? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content