[Solidtrick]

Haha don't knock the HIM, you're not a vendor for xhorse are you? I'm interested in one my HIM updates cms kind of slow.


Sent from my iPhone using Tapatalk

[apoelistas]

I wish I was. Is there a vendor from Cyprus???? How can I become a reseller/vendor??? I guess RS232 is very slow that is the reason I got the XHorse. Actually this is not the first research project I have done as a hobbyist. The reason for the x-horse 3 in 1 was the price / hardware. Then it was the problem with the AWD which needed a firmwarre update (where I needed the honda j2534 passthru to work) then it was the inability of x-horse to run on vista x64.

Projects
I have designed on access a cost control software for housing being a civil engineer.
I have added paddle shifts and multifunction (radio + cruise control control module +slip ring+wiring+new steering wheel with paddle shifts)to my bmw e46 2001 m43tu
I have added to the same car a cruise control.

I think this hack completes this hobby. Before I was into folding bikes (wheel building and gear hub addition to no gear folding bikes) after I was into automatic watches (production) and so on just to pass my time. I guess the reason is I like to fix things in general. I am now thinking into designing clever things for home. just as my next hobby.

All these hobbies started from my D day.

[Solidtrick]

I'd say this threads done you know where to find me if you need me


Sent from my iPhone using Tapatalk

[apoelistas]

Cheers. Thanks for your input. If you need any add. info on xhorse you have my email.

[jaimie946]

If anybody has trouble making the xhorse 3 in 1 work on a 64bit system pm me I found a shortcut to make it work

[apoelistas]

Ok I have good news for windows 10 x64. Although I could not open the FirmwareUpdateTool.exe in windows 10 x64, I have tested my registry hack, together with honda xhorse driver 1.4.8, CDM21216_Setup.exe driver, and latest j2534 Honda pass thru utility (for modules firmware upgrades) and x-horse with firmware 1.4.8 (original) works like a charm. I have not tested anything else since my original laptop with vista x64 has trouble with the screen. Theoretically since this works everything should be fine.

Regarding this FirmwareUpdateTool.exe I don't understand why it fails to display on the screen, though it runs as a process.

Latest HDS tested and working too under windows 10 x64.

[meiguang]

Amazing, could u share step by step as manual guide how to make our xhorse 3in1 even clone can run perfectly under windows 10 X64 for honda HDS?

Will big appreciated, thanks in advanced

---

If anybody has trouble making the xhorse 3 in 1 work on a 64bit system pm me I found a shortcut to make it work

could u share with me please....I would like to make it work under windows 10 64bit indeed, thanks in advanced Jamimi946

[apoelistas]

First you have to install the D2XX Drivers (download from the internet). Install HDS. Install patch HIMGNA.exe. Then install Xhorse driver 1.4.8. In 32 bit it must self install. In 64 bit you will have problems unless you write a registry hack and install manually the driver.

I have original X-horse 3 in 1 with latest firmware 1.4.8.

[meiguang]

The problem is xhorse driver stuck, stop when installing and not completed, this is the cause of the problem even using 32bit windows 10, do you have good xhorse driver for honda 1.4.8 with good one? I wanna try it

Thanks in advanced

First you have to install the D2XX Drivers (download from the internet). Install HDS. Install patch HIMGNA.exe. Then install Xhorse driver 1.4.8. In 32 bit it must self install. In 64 bit you will have problems unless you write a registry hack and install manually the driver.

I have original X-horse 3 in 1 with latest firmware 1.4.8.

[apoelistas]

I manually install the driver, there is only one x-horse 1.4.8 driver.
MVCI Driver for HONDA 1.4.8.msi 9.806 KB.