Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How to tune transmission?! Bmw siemens gs20
06-06-2016, 22:55 PM,
Post: #11
|
|||
|
|||
RE: How to tune transmission?! Bmw siemens gs20
You dont need to read out in bootbmode... you can do it with the original sp-daten...
I found some subroutines but nothing which i can work... Gesendet von meinem SM-N9005 mit Tapatalk |
|||
09-06-2016, 13:05 PM,
Post: #12
|
|||
|
|||
RE: How to tune transmission?! Bmw siemens gs20
Yeah possible also using SP Daten, but they are splitted. in program (0pa) and data (0da). For IDA Pro disassembler it's better to have 1 full readout, and i also wanted to see the layout of processor etc. seems to be similar to ME7.X etc.
Keep going on, i'm also interested. But some time ago i stopped disassembling that code, because it takes too much time. |
|||
12-06-2016, 16:47 PM,
Post: #13
|
|||
|
|||
RE: How to tune transmission?! Bmw siemens gs20
Ok but have you any resullts?????
With which programms you work??? Gesendet von meinem SM-N9005 mit Tapatalk |
|||
14-06-2016, 09:10 AM,
Post: #14
|
|||
|
|||
RE: How to tune transmission?! Bmw siemens gs20
I used a galletto and Boot mode similar to ME7 to read out entire chip. Then i used IDA pro to load bin file, then the magic happens, understand and define the disassembled code. Understand layout of processor and flash etc.
At least i defined some basic routines, but that's all, it was too time consuming for me and i didn't hat any motivation because i moved on to manual transmission. |
|||
02-05-2017, 20:00 PM,
Post: #15
|
|||
|
|||
RE: How to tune transmission?! Bmw siemens gs20
I have downloaded sw from tcu gs20 with bitbox.
I dont know how to tune it I need tcc and speed cluthes |
|||
16-09-2017, 17:28 PM,
Post: #16
|
|||
|
|||
RE: How to tune transmission?! Bmw siemens gs20
|