Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA 4.01.21 Standalone - Mega
06-09-2016, 23:36 PM,
Post: #11
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
I think it will work to take the ISTA-P psdzdata.
I'm looking at the FULL and DELTA files. They are unpacked and installed by the Launcher so it should be feasible to understand what is required to properly install these files for next time!! I'll keep playing. Email: [email protected] Skype: [email protected]
HU Engineering Tool MGU Engineering Tool - now with field update mode via Feature Installer. Coding 2.0 |
|||
07-09-2016, 00:59 AM,
Post: #12
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
Standalone diagnosis works quite good, but i can not make measurement Plan.
Everytime Ista says i have to test the car first, and i have done that several times. Before i copied complete psdzdata folder from ista p 59.4 to C:\Rheingold\PSdZ\data Dont know whats wrong, but i only tested with ETH (ignition voltage was not shown ) not with my icom next. Any ideas? |
|||
07-09-2016, 01:41 AM,
Post: #13
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
Thanks
in my case in win10 x64 not open when i clic in istagui RCleaner also not work, can not access to rheingoldcoreframework.dll Please, Press the Buttons and if This post help or is usefull for you! Not is needed write just only thanks in Threads
|
|||
07-09-2016, 02:02 AM,
Post: #14
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
I haven't tried diagnosis on the car yet, but it definitely runs on Win 10 x64.
Email: [email protected] Skype: [email protected]
HU Engineering Tool MGU Engineering Tool - now with field update mode via Feature Installer. Coding 2.0 |
|||
07-09-2016, 02:05 AM,
Post: #15
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
I am running Win 10 x64 too
|
|||
07-09-2016, 02:32 AM,
Post: #16
|
|||
|
|||
ISTA-D 4.01.21 Standalone - Mega
|
|||
07-09-2016, 03:14 AM,
Post: #17
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
I have successfully ran diagnostics on my F82 with ISTA4 on my HP tablet win10, x64. Nothing new needed, all previous requirements are still valid. For those having issues, dont forget to unblock stuff...
|
|||
07-09-2016, 05:29 AM,
Post: #18
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(07-09-2016, 00:59 AM)hulahans Wrote: Standalone diagnosis works quite good, but i can not make measurement Plan. I'm not sure but in the last versions I had the same Problem with ETH cable. Everything works when I use an ICOM. Try it with your ICOM Next. |
|||
07-09-2016, 05:42 AM,
Post: #19
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
For work there isn't enough folder with new SQLiteDBs?
|
|||
07-09-2016, 07:20 AM,
Post: #20
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(06-09-2016, 23:10 PM)hulahans Wrote: The main psdzdata folder extracted from BMW_ISPI_ISTA-SDP_FULL_4.01.15 is to small with 37.8gb Not sure about this, but ISTA-P is also for E Series. ISTA 4 is only for F, G and I Series. Maybe that's the reason the new psdzdata folder is smaller now... |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content