Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA 4.01.21 Standalone - Mega
08-09-2016, 12:45 PM,
Post: #51
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(08-09-2016, 11:28 AM)dracon Wrote: Release version is 4.01.21 according to BMW's internal communications to dealerships and ISPI Administrators. Below is the version info extracted from 4.01.21 SDP, look to the Mode section. Don't forget BMW could choose to general release a test version if they think it's fit for release, personally speaking at lot of BMW Software is not fit for release Code: <VersionInfo> |
|||
08-09-2016, 12:49 PM,
Post: #52
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
Ok I extracted all three SDP packages (SDF FULL .15, Delta .15/.21), and did a binary beyond compare between all three packages. The only difference I see minor additions to S15A in the Delta .21 package compared to the FULL .15 and some additions of older versions (-1) for some files, its like they forgot to add the previous version for some files... (I think Dracon eluded to that in an earlier post)
So, its a bizarre to release a Delta .15 pkg that doesn't contain any change... and in the end who cares about the S15A, dont even know what platform that is (bike?). My goal is to use the smaller footprint in combination with Esys not ISTA4 for my F8x, and in any case Esys lets you know if there are any files missing, "Check software availability". |
|||
08-09-2016, 13:26 PM,
Post: #53
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(08-09-2016, 12:49 PM)aboulfad Wrote: Ok I extracted all three SDP packages (SDF FULL .15, Delta .15/.21), and did a binary beyond compare between all three packages. The only difference I see minor additions to S15A in the Delta .21 package compared to the FULL .15 and some additions of older versions (-1) for some files, its like they forgot to add the previous version for some files... (I think Dracon eluded to that in an earlier post) S15A is the designation for G-series vehicles, if I remember correctly, they are moving to a single target for all G-series vehicles. So no division like F20, F25, F10, etc in E-Sys and pdszdata. |
|||
08-09-2016, 13:28 PM,
Post: #54
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
|
|||
08-09-2016, 13:28 PM,
Post: #55
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(08-09-2016, 12:45 PM)aknight720 Wrote:(08-09-2016, 11:28 AM)dracon Wrote: Release version is 4.01.21 according to BMW's internal communications to dealerships and ISPI Administrators. Very likely. They could have meant that for ISTA Diagnostics that .21 is the release version and could very well have something higher than .21 for the release version of the SDP packages. No-one ever said the versions had to match for all packages. |
|||
08-09-2016, 22:32 PM,
Post: #56
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
Flashed today with icom next,
one F31 which one has no most ECUs, everything works fine, measurement plan very fast ,all ECUs have been flashed. one F30 with most ECUs and no router or dhcpsrv, measurement plan fast, alle Ecus without most have been flashed, most ECUs have not been flashed ,so same as ista p! and same F30 with dhcpsrv 2.5.2 and ip 192.168.1.1 , measurement plan fast, all ECU s including most (AMPT,Kombi,NBT) have been flashed. Same as ista p So flashing works as in ista p , measurement plan takes only one minute , so you can save up a lot of time against ista p. |
|||
09-09-2016, 01:58 AM,
Post: #57
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(08-09-2016, 22:32 PM)hulahans Wrote: ....... I remember when i first flashed 2006 545i with ISTA-P........ It showed 28 Hours to complete, it took alot of my nerves and patients for 2 days ...... Now a days people have it easy..... If any of my posts or current one helps then don't forget to press thanks and add a reputation
|
|||
09-09-2016, 04:43 AM,
Post: #58
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
Hi Hulahans,
If I remember than you have copied psdzdata Files from the newest ISTA-P and just changed the path in one of the config Files. Is this right? Thank you for your continuous reports! BR Simon |
|||
09-09-2016, 05:22 AM,
Post: #59
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
I've installed both ISTA-D 4.01.21 Standalone and ISTA-P 3.59.4.004, so I can just change the path in config file to
<add key="BMW.Rheingold.Programming.PsdzDataPath" value="C:\ProgramData\BMW\ISPI\data\TRIC\ISTA-P\BMW\Services\data\ecudata\psdzdata"/> and the flash function will work, right? Thanks. |
|||
09-09-2016, 11:12 AM,
Post: #60
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(09-09-2016, 04:43 AM)Munich Simon Wrote: Hi Hulahans,Yes, i copied the psdzdata folder to <add key="BMW.Rheingold.Programming.PsdzDataPath" value="c:\Rheingold\PSdZ\data"/> Rename or delete the old psdzdata folder inside |
|||
Reputation: +1 - M-Simon [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content