[bmw335coding]

Hi guys,

i have an question.

My friend has an BMW F20 LCI M135i with adaptive led-headlights, high beam assist and speed limit info.

On another forum i read, that on this car we can code "selective beam" (anti dazzle high beam).

I found following changes;

C_AFS_ENA: F020enable
C_HBA_ENA: F020enable
LUT_FLC_FORWARDLIGHTING_Y: F001Codierwert mit AFS, F010Codierwert mit AFS, F025mit_AFS [9C 9C 9C]
C_HBA_ADAPT_SHUT_ENA default value is werte 00, I changed it to werte 01
C_HBA_GRHB_ENA default value is werte 00, I changed it to werte 01

This values are in FEM? Anyone has experiences with this and can help us?

big thanks

[masa52]

Hi
I have also adaptive led-headlights in my F06 but lights not working as "selective beam"
the question is why??
this should be as standard settings for adaptive led-headlights
let me know if you found some more information about that
will check those parameters in cafd what you mentioned

[bmw335coding]

Hi
I have also adaptive led-headlights in my F06 but lights not working as "selective beam"
the question is why??
this should be as standard settings for adaptive led-headlights
let me know if you found some more information about that
will check those parameters in cafd what you mentioned

i tested it yesterday at the M140i and it works. Changed the values from the top only.

[masa52]

All settings listed above are active in my FEM as standard
but lights not working as on videos
maybe kafas 2 required for correct working

[bmw335coding]

All settings listed above are active in my FEM as standard
but lights not working as on videos
maybe kafas 2 required for correct working

Yes i think so. The car had an KAFAS2y

[masa52]

So why my car has from factory option S552 Adaptive Led headlight together with S5AC High Beam Assistant