Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ICOM A1 & A2 & NEXT Quality (NEW PCB PICTURES!)
23-05-2016, 01:52 AM,
Post: #41
RE: ICOM A2 Quality (PCB PICTURES!)
Can someone PM link for a good ICOM A1 or A2 clone?
Interested in purchasing an ICOM for ISTA P.
Quote this message in a reply
27-05-2016, 10:08 AM,
Post: #42
RE: ICOM A2 Quality (PCB PICTURES!)
(23-05-2016, 01:52 AM)dazuc Wrote:  Can someone PM link for a good ICOM A1 or A2 clone?
Interested in purchasing an ICOM for ISTA P.

There are plenty of it in AliExpress - you can google for AliExpress URL.
Quote this message in a reply
22-07-2016, 22:26 PM, (This post was last modified: 22-07-2016, 22:29 PM by Enabled.)
Post: #43
RE: ICOM A2 Quality (PCB PICTURES!)
What about this one? It wasn't too expensive, not yet sure on the quality...

Another pic, on the other side

And the support board


Attached Files Thumbnail(s)
           
Quote this message in a reply
22-07-2016, 22:49 PM,
Post: #44
RE: ICOM A2 Quality (PCB PICTURES!)
Im thinking about heat sink version of A2 from xcar360

has anyone tested it?

http://www.xcar360.com/media/catalog/pro...m-a2-1.jpg

bikerdriveenjoy
Quote this message in a reply
23-07-2016, 03:12 AM,
Post: #45
RE: ICOM A2 Quality (PCB PICTURES!)
(22-07-2016, 22:26 PM)Enabled Wrote:  What about this one? It wasn't too expensive, not yet sure on the quality...

Another pic, on the other side

And the support board
the pictures in your post are from original icom a2..smile
so you bought original icom a2??
Quote this message in a reply
23-07-2016, 12:20 PM, (This post was last modified: 23-07-2016, 12:23 PM by Enabled.)
Post: #46
RE: ICOM A2 Quality (PCB PICTURES!)
(23-07-2016, 03:12 AM)Grease Monkey Wrote:  
(22-07-2016, 22:26 PM)Enabled Wrote:  What about this one? It wasn't too expensive, not yet sure on the quality...

Another pic, on the other side

And the support board
the pictures in your post are from original icom a2..smile
so you bought original icom a2??

Yes, it is an original. I didn't get to troll too many people, you were quick and sharp. giggle

I am curious why the USB port was cut off, and the board was somehow programmed to disable the Ethernet port (after much testing). It is in wifi only mode. Any way to fix that?

I can probably solder in a new USB port, but I already attached an ICOM A1 LAN/USB/Fan head to it to try to do a reset/restore, and it didn't seem to read from my USB drive when the 4 red light were flashing for the restore bin.



Here is what I received for dirt cheap (1st picture)



And what I made out of the parts. (2nd picture)

I swapped out the A2 board (non working LAN and USB) from one of the spare A1 boards. I still want to revive/fix the A2 board somehow.


Of the A1s only 1 board had solid red lights (with quick yellow flash on startup), and I couldn't yet do a restore on it. I would like to know how to fix this one too.

The rest work fine.


2 of the OBD heads do not power up the ICOM, so I labelled them as BAD. I would love to be able to repair those too. It isn't a ribbon problem.


Attached Files Thumbnail(s)
       
Quote this message in a reply
31-10-2016, 19:03 PM,
Post: #47
RE: ICOM A2 Quality (PCB PICTURES!)
Hey,

Here`s a few A1 PCB Pics. Bought about a month ago. Still working. thumbsup
Fan & Decent cooling plate, good cables, Hynix RAM..

[Image: 2exq8wi.jpg]

[Image: qsnytv.jpg]

[Image: 2nvtegz.jpg]
Reputation: +1 - kikis [+1]
Quote this message in a reply
[+] 4 users say Thank You to JarsaR for this post
01-11-2016, 12:30 PM,
Post: #48
RE: ICOM A1 & A2 Quality (NEW PCB PICTURES!)
From Spring-Summer 2016 Clone ICOM A1, A2, A3 have a lot of problems. A lot of bugs like KL15=0V, automatic restarting of ICOM after a few seconds after connection, missing components in A3, dead after 1-3 months etc. Need to know where to buy and need have trusted seller. Because 90% of Chinese seller forget about you after protection time is ended. Better work directly with factory or with seller who is in good contact with factory or you can drop your ICOM in recycle bin.
Visit this user's website
Quote this message in a reply
03-12-2016, 03:08 AM,
Post: #49
RE: ICOM A1 & A2 Quality (NEW PCB PICTURES!)
I'm also looking for high quality ICom
Could not find one so could not purchase.

tried latest icom on partacus.de but they were out of stock and canceled my order :/

bikerdriveenjoy
Quote this message in a reply
05-12-2016, 14:48 PM,
Post: #50
RE: ICOM A1 & A2 Quality (NEW PCB PICTURES!)
Hello! Will 9,2 mm mini pci slot fit to ICOM A1?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,728 Yesterday, 05:59 AM
Last Post: hashtagmaster
XZBMW Poor wifi signal from new ICOM's bmchicago 1 127 26-03-2024, 03:04 AM
Last Post: rocdeng
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,885 24-03-2024, 11:29 AM
Last Post: Twointje
  TESTO tool with ICOM Rolzs 5 312 17-03-2024, 20:23 PM
Last Post: Vojno
  Request xHP 6HP decrypted files and icom flasher tste1982 10 823 05-03-2024, 22:47 PM
Last Post: bradsm87
XZBMW ICOM Firmware (NEXT & A2) always current! Vojno 203 41,897 16-02-2024, 19:32 PM
Last Post: Vojno
XZBMW BMW_ISPI_ICOM-FW_03-23-22 & ICOM-Next-FW_04-23-22 shawnsheridan 22 2,363 05-02-2024, 23:47 PM
Last Post: vagrom
  Connect to MGU via SSH and ICOM anton.maier 1 322 02-02-2024, 04:46 AM
Last Post: VroomVroom
XZBMW how to connect icom remotely? dfb 5 516 29-01-2024, 22:24 PM
Last Post: dfb
XZBMW BMW ICOM OBD main cable 15pin to 16pin body1982 5 552 27-01-2024, 04:42 AM
Last Post: body1982

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content