Please Make Sure You Read The Forum Rules! , Thanks for registering We are glad you have chosen to be a part of our community :) Please do not use email addresses, website URLs, Skype info, or any other contact info as your Username.
  1. ObdToolUsa

  2. Martech

  3. obdresource

    obdresource.com
  4. Piwis tester II

  5. OBD Center

  6. ChiPTuninG



Post Reply 
Help!BMW DSC UPDATA PROBLEM
11-01-2017, 17:50 PM (This post was last modified: 11-01-2017 17:52 PM by siuball.)
Post: #1
XZBMW Help!BMW DSC UPDATA PROBLEM
Hi guys,

My car is 2006 E90 330i MT,

After updata to Sp-datenV57(Winkfp), I had the following error codes:
• Error Code 005DD2 - DSC: Hydraulic unit: adjustment, DSC unit (valves)
• Error Code 005DD0 - DSC: Hydraulic unit: adjustment, DSC unit (valves)
AND 5D5Etearstearstears

How can i dotearstearstears

I had to try this plan
===============================================
After my research every forum says use SSS Progman or NCS Expert. So I decided to use NCS Expert first of all as it is most simple to use.
When you have NCS Expert loaded with your car plugged in and ignition on. Select “File > Load profile > ExpertMode > OK. Then select your chassis by selecting F1, then selecting F3.

NCS Expert.jpg

NCS Expert2.jpg

It then asks which computer we want to code. Select one of the available options like CAS or EWS or LCM. You then have to select “F6” to go back. This will then allow you which ECU you want to code.

NCS Expert3.jpg

So for this case, we want the DSC module. So select F4 and select it. Then select F2 job select, and make sure the job name is on SG_CODIEREN and press okay.

Then select F3 to process the car. This in theory is how the new ECU is coded to the car. I however had no luck with this method.

I then decided to use SSS Progman. This is a very simple piece of software which again pretty much does the coding for you.

When you load the software, select New Session. Then click your interface and continue. Then select your car and model. Once loaded, click on ‘Load SW’. It will then ask you if you have replaced modules, select yes for the new pump. The software will then list all the modules on your vehicle. Select DSC to code it. After clicking continue, the software will create a measure plan and try to process the recoding.

However at this stage, my car failed as the software told me I had the wrong pump for the car and told me to replace the unit! SSS Progman will only work if you have the exact pump the car should have!

After more research I discovered I could code my cars VIN number into the DSC pump by using some software called Tool32.

Tool32.jpg

Once you have plugged your car in and turned your ignition on, press F3 and choose your ABS module. For me this was 'dsc_87.prg'. This will then load a series of jobs. To code your VIN number into the ABS pump, look for the options called 'c_fg_schreiben' and 'c_fg_auftrag' in the left column.

Once you find them, select 'c_fg_schreiben' and at ‘Argument’ type your car 17characters VIN and at the end put 1. So for example if your VIN is WBAVA71030VA22222 you will put 1 at the end and that should look like WBAVA71030VA222221

Once you have typed it, press F5 and it's done. You should then select 'c_fg_auftrag' (If you have it) and press F5.

This however did not work for me! After further research, I then discovered you have to calibrate your steering angle first to code in your VIN number. This can also be done in Tool 32, so repeating the above processes in Tool32, then select "lenkwinkel dsc abgleichen" (to select steering angle calibration) in the left column. Make sure your steering wheel is straight and type in your VIN into the arguments section again. Press F5 and your steering angle calibration, and VIN programming should be complete.
==========================================
But not oktearstearstears How can i do?shake
Find all posts by this user
Quote this message in a reply
11-01-2017, 17:57 PM
Post: #2
RE: Help!BMW DSC UPDATA PROBLEM
Start or get ista, and do adjustment of dsc unit.
Find all posts by this user
Quote this message in a reply
 Thanks given by: bawareca
11-01-2017, 18:07 PM
Post: #3
XZBMW RE: Help!BMW DSC UPDATA PROBLEM
(11-01-2017 17:57 PM)SweetBMW Wrote:  Start or get ista, and do adjustment of dsc unit.

i have ista,how i can do?
Find all posts by this user
Quote this message in a reply
11-01-2017, 18:52 PM
Post: #4
RE: Help!BMW DSC UPDATA PROBLEM
See attached pic    
Find all posts by this user
Quote this message in a reply
 Thanks given by: Almaretto , siuball
11-01-2017, 18:55 PM
Post: #5
RE: Help!BMW DSC UPDATA PROBLEM
(11-01-2017 18:07 PM)siuball Wrote:  
(11-01-2017 17:57 PM)SweetBMW Wrote:  Start or get ista, and do adjustment of dsc unit.

i have ista,how i can do?


Do you have Ista-D or Ista-P?
With Ista D you go to Service Functions, then Suspension and look for DSC Options.
With Ista P you have to go to postprocessing (dont know the exact english name)
Find all posts by this user
Quote this message in a reply
 Thanks given by: siuball
11-01-2017, 19:07 PM
Post: #6
RE: Help!BMW DSC UPDATA PROBLEM
(11-01-2017 18:55 PM)DD3 Wrote:  
(11-01-2017 18:07 PM)siuball Wrote:  
(11-01-2017 17:57 PM)SweetBMW Wrote:  Start or get ista, and do adjustment of dsc unit.

i have ista,how i can do?


Do you have Ista-D or Ista-P?
With Ista D you go to Service Functions, then Suspension and look for DSC Options.
With Ista P you have to go to postprocessing (dont know the exact english name)


Dont have to use ISTA\P for this, if he had updated with ISTAP (which he hasnt) it would have done this job automatically. He updated with WinKFP
Find all posts by this user
Quote this message in a reply
 Thanks given by: Almaretto
11-01-2017, 19:09 PM (This post was last modified: 11-01-2017 19:10 PM by siuball.)
Post: #7
RE: Help!BMW DSC UPDATA PROBLEM
(11-01-2017 18:55 PM)DD3 Wrote:  
(11-01-2017 18:07 PM)siuball Wrote:  
(11-01-2017 17:57 PM)SweetBMW Wrote:  Start or get ista, and do adjustment of dsc unit.

i have ista,how i can do?


Do you have Ista-D or Ista-P?
With Ista D you go to Service Functions, then Suspension and look for DSC Options.
With Ista P you have to go to postprocessing (dont know the exact english name)

I have done, but still not, the error code is still theretearstearstears


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
11-01-2017, 19:27 PM
Post: #8
RE: Help!BMW DSC UPDATA PROBLEM
Did you try adjustment of DSC Unit too?
Try to start Engine, turn steering wheel full right then full left then straight and then drive for min. 100meters. This should adjust it in case when your software dont adjust it right for some reason
Find all posts by this user
Quote this message in a reply
 Thanks given by: siuball
11-01-2017, 22:08 PM (This post was last modified: 11-01-2017 23:24 PM by myfirst1er.)
Post: #9
RE: Help!BMW DSC UPDATA PROBLEM
1. Flash winkfp
2. Coding DSC with NCS
3. Steering angle sensor adjustment
4. Adjustment complete DSC unit, Not just sensor!
5. Install RPA
6. Clear error


I wish you success


Attached File(s) Thumbnail(s)
       
Find all posts by this user
Quote this message in a reply
 Thanks given by: siuball
12-01-2017, 07:59 AM
Post: #10
RE: Help!BMW DSC UPDATA PROBLEM
(11-01-2017 22:08 PM)myfirst1er Wrote:  1. Flash winkfp
2. Coding DSC with NCS
3. Steering angle sensor adjustment
4. Adjustment complete DSC unit, Not just sensor!
5. Install RPA
6. Clear error


I wish you success

thank you for all,i fixed my problemenjoyenjoyenjoyrockrock
Find all posts by this user
Quote this message in a reply
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  ConnectedDrive Software update problem in masa52 10 695 Today 10:21 AM
Last Post: masa52
XSMini NCS FA PROBLEM in siuball 10 312 Yesterday 18:35 PM
Last Post: siuball
  ISTA+ 4.03.21 (the problem with a combination of BMW x1) in Cowboy 8 326 21-01-2017 16:30 PM
Last Post: Cowboy
XZBMW M Performance Brake Problem in siuball 15 772 20-01-2017 11:22 AM
Last Post: BMW888
XZBMW [SOLVED] BMW E70 KAFAS camera calibration problem in psampson 13 605 18-01-2017 06:31 AM
Last Post: psampson
  ISTA 4.03.21.18572 Standalone PROBLEM SERVICE FUNCTIONS? in snypertje 2 500 11-01-2017 16:40 PM
Last Post: BMWLorenz
XZBMW FSTOOL2 INSTALTALLTION PROBLEM in leng007 2 297 08-01-2017 17:31 PM
Last Post: codemybmw
  NBT EVO and TCB2 in Exx series coding problem in simplextibi 2 451 12-11-2016 09:37 AM
Last Post: simplextibi
  Solved ✔ ISTA-P EXPERT MODE problem in number7 1 447 12-11-2016 07:41 AM
Last Post: number7
  Solved ✔ Bmw Z4 problem after replacing dme in Gregor 17 920 07-11-2016 20:46 PM
Last Post: BMWzone

Forum Jump:


User(s) browsing this thread:

Return to TopReturn to Content