Possibly Related Threads…

***mariux0510*** · (This post was last modified: 27-03-2017, 20:31 PM by Clusters.)

Hello,

Please help somebody disabled additive system for this car:
Ford Focus C-MAX 2.0 TDCi 2005
ECU: Siemens SID803 5WS40166K-T 3DGC J38AC
SW: 8M51
HW: 10102989AA

FULL BDM

I try disabled faults:
P2584 Additive system MIL signal
P2585 Additive system warning lamp

1 day working perfect, but now MIL ON again
No faults in ECU, but additive system faults:
P1924 and P1927

Please help disabled absolutely additive system worried

Thank you! handshake

***betrescudan*** · 23-03-2017, 14:36 PM,

(23-03-2017, 12:11 PM)mariux0510 Wrote: Hello,

Please help somebody disabled additive system for this car:
Ford Focus C-MAX 2.0 TDCi 2005
ECU: Siemens SID803 5WS40166K-T 3DGC J38AC
SW: 8M51
HW: 10102989AA

FULL BDM

I try disabled faults:
P2584 Additive system MIL signal
P2585 Additive system warning lamp

1 day working perfect, but now MIL ON again
No faults in ECU, but additive system faults:
P1924 and P1927

Please help disabled absolutely additive system

Thank you!

your solution (if you want a good solution...)...and i think is better not free...
mike service yes

***mariux0510*** · 23-03-2017, 15:24 PM,

Maybe there is an easier way to disable this system for free? secret

***mariux0510*** · 23-03-2017, 22:29 PM,

How disable additive system for self? read

Maybe easier to burning this car rofl

***betrescudan*** · (This post was last modified: 24-03-2017, 05:21 AM by betrescudan.)

(23-03-2017, 22:29 PM)mariux0510 Wrote: How disable additive system for self?

Maybe easier to burning this car

write file with dpf off
disconect conector from aditiv pump
make diag and see Pcode error
now,in the file with dpf off do also dtc off
job done

***mariux0510*** · (This post was last modified: 24-03-2017, 07:58 AM by mariux0510.)

I don't have possibility to this ECU disable DPF,
but I tried to disconnect the connector from additive system,
then ECU showed fault code U0118,
but this fault code can't disable worried

***betrescudan*** · (This post was last modified: 27-03-2017, 10:43 AM by betrescudan.)

(24-03-2017, 07:57 AM)mariux0510 Wrote: I don't have possibility to this ECU disable DPF,
but I tried to disconnect the connector from additive system,
then ECU showed fault code U0118,
but this fault code can't disable

try with this

(23-03-2017, 12:11 PM)mariux0510 Wrote: Hello,

Please help somebody disabled additive system for this car:
Ford Focus C-MAX 2.0 TDCi 2005
ECU: Siemens SID803 5WS40166K-T 3DGC J38AC
SW: 8M51
HW: 10102989AA

FULL BDM

I try disabled faults:
P2584 Additive system MIL signal
P2585 Additive system warning lamp

1 day working perfect, but now MIL ON again
No faults in ECU, but additive system faults:
P1924 and P1927

Please help disabled absolutely additive system

Thank you!

nothing to loose...try this...

***mariux0510*** · 27-03-2017, 20:25 PM,

Solved problem, perfect solution thumbsup

***betrescudan*** · 28-03-2017, 06:39 AM,

thanks for report

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Ford C-MAX MED17.0.1 p0420	mainecoon6	1	32	Yesterday, 15:08 PM Last Post: FinnY
	FORD TRANSIT SID209 EK31-12A650-EM FULL DUMP REQUIRED	djollie	1	31	Yesterday, 11:23 AM Last Post: ecutech123
	DCM3.4 PEUGEOT DPF ADDITIVE	rasmoka	1	25	03-06-2024, 14:10 PM Last Post: rece1p23
	Ford Transit AdBlue off SID211	ramzn	5	264	03-06-2024, 11:35 AM Last Post: ramzn
	Ford sid211	Albert-M	0	65	29-05-2024, 05:32 AM Last Post: Albert-M
	ford ecosport need ori file	raidez22	0	27	28-05-2024, 14:58 PM Last Post: raidez22
	dtc off ford ecoboost med bosch17.2	pistolo30	0	56	27-05-2024, 18:18 PM Last Post: pistolo30
	Focus 2.0 Petrol Visteon Esu-131 DTC OFF	fordobd	2	54	27-05-2024, 15:05 PM Last Post: fordobd
	Ford ranger sid209 scr probleme	haythem	5	115	27-05-2024, 12:37 PM Last Post: baatouz
	Ford Kuga DCM3.5 - after OBD flash with Autotuner dead	vopi	3	94	25-05-2024, 20:50 PM Last Post: vopi

Contact Us