[pdc]

HI

has anyone suceed on coding a canbus K001 generation bmw k1600gt with esys?.
i am trying but i get always connection errors.
i am using ICOM.With F cars no problem.

thanks in advance

[ferrum]

Coding in e-sys only works with the original icom-d!

[pdc]

Clones do not work?



quote='ferrum' pid='233947' dateline='1490525619']
Co ding in e-sys only works with the original icom-d!
[/quote]

---

Ista P and Ista D work without problems with my icom D.....

Coding in e-sys only works with the original icom-d!

[ferrum]

Ista-p should not work with a simple adapter
Connection so configured?

[pdc]

Yes for all configuration,but i am using icom/ethernet instead of icom/dcan.
Actualy i use icom d cable from china.
ip adress from itool radar.

Ista-p should not work with a simple adapter
Connection so configured?

[ferrum]

I showed you the correct setting.
Correct as I showed you.

[pdc]

Ok i will give a try.

thank you very much

I showed you the correct setting.
Correct as I showed you.

[pdc]

Hi Ferrum

no luck i get the some error:
Connection check failed-gateway/ecus are not correctly connected

any idea?

thanks

[BMWS1000RR]

What year K1600 is it? what ECU is my main point? it is either a BMSKP or BMSX

[autoraedarum]

K1600 should be a BMSX