Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

09-04-2017, 16:43 PM,
Post: #321
RE: FSTOOL
Sebastian, after check with intel via teamviewer, he think that the problem is on my pc that the ediabas have a faulty archive or something missed, will try to install all from 0 and try again to manage the 1B file, as far as even with gini was not able to manage it.

So next week will format laptop and tell if from a clean installation everything works.

Thank´s for your advices, keep you informed with the evolution of the problem.
Quote this message in a reply
[+] 2 users say Thank You to fumantwo for this post
09-04-2017, 17:27 PM,
Post: #322
RE: FSTOOL
FUNMANTWO
Apparently I'm having the same issue now just cannot get 1b to cic. same issue as earlier don't know what happened but it was working earlier. Keep me posted about anything you come up with to resolve the issue..
Many Thanks
Quote this message in a reply
11-04-2017, 11:49 AM,
Post: #323
RE: FSTOOL
For all the Fellow BMW'IANS suffering from error 7009 in FSTOOLS with CIC here is the solution!!!!
Guess what? i managed to import 1B via FSTOOL. P.S. I uninstalled BMW STANDARD TOOLS, uninstalled FSTOOL and Carserver. Used Ediabas installation from Dr Gini, Updated ECU Folder From DR GINI to my Ediabas Location. and also updated the Carserver from Dr Gini Ediabas\bin\server. Amazingly it works!!!!!
P.S. I used DR GINI version B020
Thanks anyways
Much Appreciated

Regards
Reputation: +3 - intel123 [+1] , fumantwo [+1] , Czozen [+1]
Quote this message in a reply
[+] 14 users say Thank You to sebastianfernandes for this post
15-04-2017, 16:39 PM,
Post: #324
RE: FSTOOL
Hello

can anybody build an archive of a working setup of carserver;fstool2;dtd;jre directories and upload somewhere? it is not so big - ~50MB.

thx and cheers
Quote this message in a reply
15-04-2017, 19:14 PM,
Post: #325
RE: FSTOOL
(15-04-2017, 16:39 PM)danyro Wrote:  Hello

can anybody build an archive of a working setup of carserver;fstool2;dtd;jre directories and upload somewhere? it is not so big - ~50MB.

thx and cheers

I shall try to upload it..
Quote this message in a reply
[+] 2 users say Thank You to sebastianfernandes for this post
17-04-2017, 18:10 PM,
Post: #326
FSTOOL
I waiting to smile


Wysłane z iPhone za pomocą Tapatalk

Did I helped you?
Than please, give me Reputation and Thanks.

EntryNav2 - Custom FSC SET for any VIN - Patch REMOTE
EntryNav2 - Component Protection remove REMOTE
EntryNav2 - Carplay with ATM or withOUT REMOTE
8HP - Clear ISN Remote
BMW FSC Repair packs | FSC map codes (normal / Lifetime)
Full FSC Set + CarPlay Fullscreen - NBT EVO ID5/6(any software version)
EVO iDrive 4 to iDrive 6 FLASH including CarPlay Fullscreen
EVO Bootloader FIX / HW4.1 BTLD FIX / VO FIX / REGION CHANGE / BLACK SCREEN FIX / CLEAR V850

KAFAS 2/4 SLI / MGU REGION CHANGE / CARPLAY 
KAFAS4 Virgin
Quote this message in a reply
18-04-2017, 09:54 AM,
Post: #327
FSTOOL
I can't upload fsc certificates... can anybody help me? I can connect, but when I try in sw develop to get certificates gives me always error... maybe by teamviewer if someone can?


Enviado desde mi iPhone utilizando Tapatalk
Quote this message in a reply
18-04-2017, 17:56 PM,
Post: #328
RE: FSTOOL
(18-04-2017, 09:54 AM)hipolitogt Wrote:  I can't upload fsc certificates... can anybody help me? I can connect, but when I try in sw develop to get certificates gives me always error... maybe by teamviewer if someone can?


Enviado desde mi iPhone utilizando Tapatalk

Send me a PM wink
Quote this message in a reply
23-04-2017, 09:26 AM,
Post: #329
RE: FSTOOL
FSTOOL installation problem:

http://cartechnology.co.uk/showthread.ph...#pid241600
Quote this message in a reply
[+] 9 users say Thank You to Gini for this post
24-04-2017, 21:22 PM,
Post: #330
RE: FSTOOL
(23-04-2017, 09:26 AM)Gini Wrote:  FSTOOL installation problem:

http://cartechnology.co.uk/showthread.ph...#pid241600

Thanks for the link. It certainly simplifies the installation.

However, sometimes when I try to load an fsc to edit or sign, Fstool closes. If I do manage to load one the program always closes when I try to save it.

Any clues?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Help FSTOOL[11049] CIC retrofit Rawediag 13 3,240 01-12-2023, 12:17 PM
Last Post: NeRkO20
XZBMW FSTool 2.0.2.1 without viruses LeonidLunin 15 3,000 13-07-2023, 10:23 AM
Last Post: NAVJunk
XZBMW E70 Certs, how to 'virginize' CIC or get FSTool working? Tawa 5 1,241 20-01-2022, 07:59 AM
Last Post: ccfj1
  FSTool Import Issues - 6F and 9C Only mxchris727 5 1,303 01-10-2019, 00:11 AM
Last Post: codemybmw
XZBMW Help with CIC patch, fstool duss46 2 900 09-09-2019, 21:32 PM
Last Post: duss46
  fstool any help how to use and connect !!??? rana 0 438 07-06-2019, 07:26 AM
Last Post: rana
XZBMW HELP INSTALL FSTOOL atalay 3 967 23-04-2019, 20:32 PM
Last Post: ____ANGEL___
XZBMW Problems with insert fscs with fstool atalay 7 1,512 14-04-2019, 10:17 AM
Last Post: atalay
XZBMW FSTool Error spk1338 2 1,313 02-02-2019, 01:37 AM
Last Post: flacoramos
XZBMW FSTOOL installation problem yzc729 14 8,777 11-10-2018, 09:24 AM
Last Post: Sanyi85

Forum Jump:


Users browsing this thread:
11 Guest(s)

Return to TopReturn to Content