[infinity]

NEED KEY+immo+ecu matching .
I tried 35 minutes pin 4 & 13 but to no avail
i think i can start car by get immo and ecu matching files
can someone do it for me
thanks in advance.

[raffy haddad]

Hi
Post key data and ecu dump
Regards

[infinity]

Hi
Post key data and ecu dump
Regards

THANKS FOR REPLY SIR ,
I have attached ecu and immo dump.
thanks in advance

[raffy haddad]

Hi
I will try to help you
But if you can give more details about the problem
That you have
Regards

[infinity]

Hi
I will try to help you
But if you can give more details about the problem
That you have
Regards

The ECU got burnt and we bought a new one
but they have misplaced the old one ,
i just need to sync ecu to immo to start
the car .
i have done the pin 4 and 13 trick but did not work .
thanks for your help

[raffy haddad]

Hello
The ecu data seems not good
What eeprom is in the ecu ?
In immobox there is 93c66 ?
Is ecu data have been read before or after jumping 4 and 13 pin ?
Also do you have key reader ? If yes read key and post data here
Also when you jump 4 and 13 did you left the driver door open ?
And it should be for 30 mn
Try again and report
Regards

[infinity]

Hello
The ecu data seems not good
What eeprom is in the ecu ?
In immobox there is 93c66 ?
Is ecu data have been read before or after jumping 4 and 13 pin ?
Also do you have key reader ? If yes read key and post data here
Also when you jump 4 and 13 did you left the driver door open ?
And it should be for 30 mn
Try again and report
Regards

Thanks very much sir.
i have another ecu with me which i have read its file in case
the first ecu dump is bad . ecu eeprom is 93C56
i have also read the key data with abrites tag key tool
and attached both .

[raffy haddad]

Hello
The ecu data seems not good
What eeprom is in the ecu ?
In immobox there is 93c66 ?
Is ecu data have been read before or after jumping 4 and 13 pin ?
Also do you have key reader ? If yes read key and post data here
Also when you jump 4 and 13 did you left the driver door open ?
And it should be for 30 mn
Try again and report
Regards

Thanks very much sir.
i have another ecu with me which i have read its file in case
the first ecu dump is bad . ecu eeprom is 93C56
i have also read the key data with abrites tag key tool
and attached both .

hi
please put this file to eeprom and solder back to ecu aand test
please report
regards

[infinity]

I found set of files from both ecu and immo andi want to add my key data to
the immo and try it on my duet .
please help me modify this immo file with my 4C KEY DATA
00 00 7E CE BF F6 05 00 00 00 00 B0 29 7E 00 00
thanks in advance

[raffy haddad]

Hi infinite
the set data that you sent is like the file i sent you
please use it i put your keys in it as you readt it by tag tool
The file is duet ecu new rar
The one i posted
Regards