Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

FSTOOL installation problem
22-08-2017, 13:58 PM,
Post: #11
RE: FSTOOL installation problem
Have you set the correct interface type in ediabas? Better of using Easy connect...
Quote this message in a reply
22-08-2017, 14:16 PM, (This post was last modified: 22-08-2017, 14:17 PM by Arch30n.)
Post: #12
RE: FSTOOL installation problem
I've set my EDIABAS.INI with ediabas_konfigurator to STD:OBD, i'm using D+KCAN cable, i also have a ENET cable.

My EDIABAS.INI:
EDIABAS.INI.txt
File Type: .txt
Downloaded: 68 times
Size: 25.68 KB


2009 BMW E60 525DA LCI - EGR/DPF Removed+DownPipe+Stage 2 - S620A and Combox Retrofit with 6NF/6FL/6NR - Some other codings...
Quote this message in a reply
22-08-2017, 16:26 PM, (This post was last modified: 22-08-2017, 19:48 PM by Arch30n.)
Post: #13
RE: FSTOOL installation problem
Problem solve with a fresh Win 7 x64 install.

I can now do a "get status" and "check FSC" into FStool and my VIN appears.

2009 BMW E60 525DA LCI - EGR/DPF Removed+DownPipe+Stage 2 - S620A and Combox Retrofit with 6NF/6FL/6NR - Some other codings...
Quote this message in a reply
28-08-2018, 19:06 PM, (This post was last modified: 28-08-2018, 19:39 PM by ccfj1.)
Post: #14
RE: FSTOOL installation problem
Hi all,

INPA = works
NCSexpert = works
Ediabes = works.
WINkftp = works
Ista-d = works
Ista-p = works
FSC-tools = works

All on d-kcan lead, everything works perfectly.

I can even FTP ftp://169.254.199.99 from a browser (ethernet lead) to the CIC unit and get the 1b fille.

I have installed fstool and the jre. (both 1.4.2 and 1.5.0.22, and i can get it to run, but fstool will not establish a connection to the cic unit with the d-kcan lead.

Any one have any ideas how to get it to connect??

Thanks

ok, I didnt have the carserver dir in my EC-apps dir.

So installed and when i run the csd-start.bat file i now get an api32.dll proceedure entry point error

Any ideas?

Ok, now installed correct 60k api32.dll file and now get this..

But the fstool still does not get a connection


Attached Files Thumbnail(s)
           
Quote this message in a reply
11-10-2018, 09:24 AM,
Post: #15
RE: FSTOOL installation problem
(28-08-2018, 19:06 PM)ccfj1 Wrote:  Hi all,

INPA = works
NCSexpert = works
Ediabes = works.
WINkftp = works
Ista-d = works
Ista-p = works
FSC-tools  = works

All on d-kcan lead, everything works perfectly.

I can even FTP ftp://169.254.199.99 from a browser (ethernet lead) to the CIC unit and get the 1b fille.

I have installed fstool and the jre. (both 1.4.2 and 1.5.0.22, and i can get it to run, but fstool will not establish a connection to the cic unit with the d-kcan lead.

Any one have any ideas how to get it to connect??

Thanks

ok, I didnt have the carserver dir in my EC-apps dir.

So installed and when i run the csd-start.bat file i  now get an api32.dll proceedure entry point error

Any ideas?

Ok, now installed correct 60k api32.dll file and now get this..

But the fstool still does not get a connection

I have the same problem!
All of apps is work, only FSTOOL not!
Pls help!
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  MGU21 Emmc Writing Problem donjuan020 0 89 Yesterday, 21:47 PM
Last Post: donjuan020
XZBMW BMW e87 LCI hralights retrofit problem XeoN 1 52 31-05-2024, 14:40 PM
Last Post: wrp_199
XZBMW G30 Entrynav2 - rear camera retrofit problem Krysiaman 19 1,401 23-05-2024, 20:39 PM
Last Post: Node
  Bmw G31 retrofit Mgu id7 atm problem intranet 20 2,712 26-04-2024, 08:06 AM
Last Post: smilo
XZBMW NBT EVO Connected Drive problem after update I-Level SkeYT 47 4,923 22-04-2024, 11:44 AM
Last Post: kwat
XZBMW Solved ✔ Installation of EDIABAS Edward1968 2 288 05-04-2024, 19:03 PM
Last Post: CATAHA
  BMW E60 coding problem GarageX 8 397 02-04-2024, 10:07 AM
Last Post: GarageX
XZBMW Bmw 5,f10 radio problem RobertRexhaj 3 189 28-03-2024, 18:47 PM
Last Post: Unspec
  ISTA launcher problem Red_bean_bun 1 304 26-03-2024, 05:11 AM
Last Post: 2013m5
  Dme Cas synchronization Problem donjuan020 3 298 25-03-2024, 21:55 PM
Last Post: BmwMerc

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content