Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
31-08-2017, 11:25 AM,
Post: #11
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
What is the reason to upgrade icom? Since i had purchased it some time ago it didnt asked for upgrade when using ista or ista-p.
Quote this message in a reply
31-08-2017, 12:25 PM,
Post: #12
BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
(31-08-2017, 11:25 AM)avatarpr Wrote:  What is the reason to upgrade icom? Since i had purchased it some time ago it didnt asked for upgrade when using ista or ista-p.


It will if you install the official .msi for the upgrade. It will prompt you for the upgrade when connecting to a vehicle.


Sent from my iPhone using Tapatalk Pro

If this post helped you in anyway please use the thanks and/or REP buttons down here.under Thanks!
Quote this message in a reply
30-09-2017, 00:32 AM,
Post: #13
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
(31-08-2017, 02:31 AM)Wesk18 Wrote:  Didn't work for me

I fixed it in post #8 of this thread sorry for the initial error, I couldn't find my A2 at the time to test it, but I have now.

If this post helped you in anyway please use the thanks and/or REP buttons down here.under Thanks!
Quote this message in a reply
04-02-2018, 13:09 PM,
Post: #14
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
(23-08-2017, 18:57 PM)aknight720 Wrote:  In the later ICOM Firmware, BMW have decided to close ssh...



Hey,

What does this ssh mean? I do not understand.secret

Thanks!
Quote this message in a reply
27-02-2018, 22:17 PM,
Post: #15
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
Hi friends

i can use this version to update firm in ICOM A2 firmrev136 actually ?

thanks wink
Quote this message in a reply
28-02-2018, 06:44 AM,
Post: #16
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
(27-02-2018, 22:17 PM)ka_rai Wrote:  Hi friends

i can use this version to update firm in ICOM A2 firmrev136 actually ?

thanks wink

Yes.
Quote this message in a reply
05-03-2018, 19:58 PM, (This post was last modified: 06-03-2018, 00:16 AM by Clusters.)
Post: #17
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
Hi,

i got an ICOM A2 Clone with 3-15-00 on it (reachable over web UI) and tried to update it with this version.
I got immediately after Bootimage flash start the error that it could NOT be successfully updated.

Icom dont worked afterthat normally and flashing red light COMM.
In the update log file it stays: "Signature check failed"

Did someone have this error and what is the solution?
- Should I try again on some other way?
- Should I try to restore the ICOM image and how to that right? - Is this guide still useable, becouse it seems to be for A1? -

Thanks in Advance for hints smile


Solved:
Followed the procedure in the pdf with ICOM_Restore over the file from this topic.
Now it is working like a charm, Phiyy


Attached Files
MEGA link.txt
File Type: .txt
Downloaded: 214 times
Size: 50 bytes

Quote this message in a reply
[+] 5 users say Thank You to ChampioNbg for this post
23-03-2018, 20:57 PM,
Post: #18
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
Hi all,

Ok ive used the restore file and i still get the 2 quick flash led(red).

but this is the restore log from the usb

Builddate 2014-04-17 16:25
=> Updating boot image 1
=> Updating app image 1
=> Resetting u-boot parameters
00:01:A9:00:EE:E9
Current Mac: 00:01:A9:00:EE:E9
Serialnumber: 1120134
Write mac: 00:01:A9:00:EE:E9
=> Cleaning up /config...
=> Set restore.bin counter...
=> Setting flags
Success (EEPROM)
Success (EEPROM)
Success (EEPROM)
Success (EEPROM)
Success (EEPROM)
Success (EEPROM)
=> Done.
Success (ATMEL)
=> DONE

does this confile that the restore worked but something else is broken???

any help would be apreciated
Quote this message in a reply
24-03-2018, 15:38 PM,
Post: #19
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
Never mind. reastore wored fine, found problem to be bent pin in icom.

all working now.

Thansk to the op for the zip.
Quote this message in a reply
15-06-2018, 09:59 AM,
Post: #20
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
Hi friends

i can use this version to update firm in ICOM P actually ?

thanks wink1
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,753 Yesterday, 05:59 AM
Last Post: hashtagmaster
XZBMW Poor wifi signal from new ICOM's bmchicago 1 131 26-03-2024, 03:04 AM
Last Post: rocdeng
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,900 24-03-2024, 11:29 AM
Last Post: Twointje
  TESTO tool with ICOM Rolzs 5 316 17-03-2024, 20:23 PM
Last Post: Vojno
  Request xHP 6HP decrypted files and icom flasher tste1982 10 828 05-03-2024, 22:47 PM
Last Post: bradsm87
XZBMW ICOM Firmware (NEXT & A2) always current! Vojno 203 41,937 16-02-2024, 19:32 PM
Last Post: Vojno
XZBMW BMW_ISPI_ICOM-FW_03-23-22 & ICOM-Next-FW_04-23-22 shawnsheridan 22 2,375 05-02-2024, 23:47 PM
Last Post: vagrom
  Connect to MGU via SSH and ICOM anton.maier 1 322 02-02-2024, 04:46 AM
Last Post: VroomVroom
XZBMW how to connect icom remotely? dfb 5 520 29-01-2024, 22:24 PM
Last Post: dfb
XZBMW BMW ICOM OBD main cable 15pin to 16pin body1982 5 556 27-01-2024, 04:42 AM
Last Post: body1982

Forum Jump:


Users browsing this thread:
vtechbmw, 1 Guest(s)

Return to TopReturn to Content