Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

NCSExpert Unknown Error Help
07-09-2017, 08:53 AM,
Post: #11
RE: NCSExpert Unknown Error Help
(07-09-2017, 08:45 AM)SweetBMW Wrote:  I dont remember all of the part numbers, but my point is that I have had to replace LMs when doing this conversion as it wont accept the coding. But by all means, if you dont believe me, you are free to not do so. read
It maybe incompatible with headlights, but you can install it and code it anyway, because all LMA's are suitable for E6x series. I think TS should provide ZBNR and ident info of that ecu first.
Quote this message in a reply
07-09-2017, 08:58 AM,
Post: #12
RE: NCSExpert Unknown Error Help
(07-09-2017, 08:53 AM)inotherwords Wrote:  
(07-09-2017, 08:45 AM)SweetBMW Wrote:  I dont remember all of the part numbers, but my point is that I have had to replace LMs when doing this conversion as it wont accept the coding. But by all means, if you dont believe me, you are free to not do so. read
It maybe incompatible with headlights, but you can install it and code it anyway, because all LMA's are suitable for E6x series. I think TS should provide ZBNR and ident info of that ecu first.

Yeah he should provde more info.

But on the other hand, why then bother making two different LMs for the E6x? Just for fun??
Quote this message in a reply
07-09-2017, 09:04 AM, (This post was last modified: 07-09-2017, 09:42 AM by inotherwords.)
Post: #13
RE: NCSExpert Unknown Error Help
(07-09-2017, 08:58 AM)SweetBMW Wrote:  But on the other hand, why then bother making two different LMs for the E6x? Just for fun??

LMA without AHL module is just cheaper. Of course it will not work with AHL headlights correctly, but everything else would work. The only difference between them is the wiring for headlights and PT-CAN availability in the harness.
Quote this message in a reply
07-09-2017, 16:34 PM,
Post: #14
RE: NCSExpert Unknown Error Help
Not sure if its of any use but

ZB: 9116260

ECU Family: LM360
Quote this message in a reply
08-09-2017, 09:13 AM,
Post: #15
RE: NCSExpert Unknown Error Help
(07-09-2017, 16:34 PM)Mrg0721 Wrote:  Not sure if its of any use but

ZB: 9116260

ECU Family: LM360

Well, that LM is suitable for cars with AHL. You can disable it via coding. It seems your NCS Expert doesn't have SP-Daten files or they are too old.
Quote this message in a reply
08-09-2017, 16:44 PM,
Post: #16
RE: NCSExpert Unknown Error Help
(08-09-2017, 09:13 AM)inotherwords Wrote:  
(07-09-2017, 16:34 PM)Mrg0721 Wrote:  Not sure if its of any use but

ZB: 9116260

ECU Family: LM360

Well, that LM is suitable for cars with AHL. You can disable it via coding. It seems your NCS Expert doesn't have SP-Daten files or they are too old.

SP-Daten files are in place and I'm using 62.3
Not sure what could be the problem. The LM module has never been updated though if I'm not mistaken
Quote this message in a reply
09-09-2017, 08:23 AM, (This post was last modified: 09-09-2017, 08:24 AM by inotherwords.)
Post: #17
RE: NCSExpert Unknown Error Help
(08-09-2017, 16:44 PM)Mrg0721 Wrote:  
(08-09-2017, 09:13 AM)inotherwords Wrote:  
(07-09-2017, 16:34 PM)Mrg0721 Wrote:  Not sure if its of any use but

ZB: 9116260

ECU Family: LM360

Well, that LM is suitable for cars with AHL. You can disable it via coding. It seems your NCS Expert doesn't have SP-Daten files or they are too old.

SP-Daten files are in place and I'm using 62.3
Not sure what could be the problem. The LM module has never been updated though if I'm not mistaken
Post a screenshot of NCS Expert with that error. And yes, LMA was not updated.
Quote this message in a reply
09-09-2017, 09:21 AM,
Post: #18
RE: NCSExpert Unknown Error Help
Just a thought here. If you don't remove 524 from vo. Can you then code LM? If yes. Then datens are not the problem....
Quote this message in a reply
09-09-2017, 09:31 AM,
Post: #19
RE: NCSExpert Unknown Error Help
(09-09-2017, 09:21 AM)SweetBMW Wrote:  Just a thought here. If you don't remove 524 from vo. Can you then code LM? If yes. Then datens are not the problem....

Yeah, he can try of course, but according to ZBNR it's LMA with AHL.
Quote this message in a reply
09-09-2017, 09:33 AM,
Post: #20
NCSExpert Unknown Error Help
I was trying to make you understand that there is not a daten issue here. The problem is wrong LM variant.

Lm1 has two completely different versions. Lm2 can be coded from ahl to non ahl.

Lm1 can't.


Sent from my iPhone using Tapatalk

 | BimmerFiks ASInstagram |

G31 530D xDrive  - Imperial Blau 
Retrofits: 2TB  - 

[/size]
Coming: M-Sport - M Performance Exhaust 

Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  BMW E83 A1 error - MRS: No message from DSC ... ivanp 22 902 Yesterday, 22:09 PM
Last Post: ivanp
XZBMW SSD Creator Ncsexpert (New Tool) scorpium59 541 38,004 26-03-2024, 21:22 PM
Last Post: Jack79
  F15 6WB Retrofit VIN Error moreply 4 174 25-03-2024, 07:24 AM
Last Post: RuleNormaliai
XZBMW F15 Programming Error mcrussell 7 385 20-03-2024, 05:38 AM
Last Post: SweetBMW
  NBT EVO HW4.1 CheckMemory Error moreply 10 460 19-03-2024, 19:43 PM
Last Post: moreply
XZBMW xdrive off with esys without error in dash dankocg 11 2,271 14-03-2024, 13:41 PM
Last Post: Adekborys69
XZBMW G31 LCI Tail Lights retrofit coding error tste1982 27 1,800 10-03-2024, 21:29 PM
Last Post: vanos
  Esys I-Step error adamnewport 10 412 08-03-2024, 09:07 AM
Last Post: Hoborg
XZBMW psdz error furnpick 4 130 05-03-2024, 15:20 PM
Last Post: furnpick
XSMini DSC Module Coding - Error 5DE3 TLG 3 153 24-02-2024, 07:47 AM
Last Post: Stratofortress

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content