[Studie]

Hey guys,

I have been trying to get my Rheingold ISTA-D working, but it is not responding at all.
The previous versions were working fine till I updated recently.
Right now, when I try to do a "Complete Identification" the Connection Manager does not show up for me to select my interface (ICOM).
Any idea why this is happening?
I have tried everything, re-installed and everything.

Please advise.

[OPaul]

Same problem here , still did't make it work , I think the cable is not good , because I have the same error if the cable is unplugged .

[Studie]

Cable is good, I fixed the problem. Windows can be so stupid sometimes. ISTA-D needs administrative rights now, and the rest of the suite works fine.

[OPaul]

On what did you use admin rights ?

[Mrg0721]

On what did you use admin rights ?

Right click Ista icon and select Properties.
Then on the Compability tab, towards the bottom there is an option to run program as administrator, check that box and hit ok until all windows closed. Then run ista again

[OPaul]

Hmm , I did't do that when i have used with an Enet cable and it worked just fine ... I will give it a try , but i think that is not the problem , Thx ...

[Mrg0721]

Can you see your icom in itool radar?

[Studie]

On what did you use admin rights ?

Right click Ista icon and select Properties.
Then on the Compability tab, towards the bottom there is an option to run program as administrator, check that box and hit ok until all windows closed. Then run ista again

That is exactly what I did. It fixed it.

[jararak]

Last time I was tryting to sort same thing for 2-3 days. than I figured out, I've changed my IP settings when I was connected to CIC via usb network adapter