Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ultimate Ediabas/ISTA+ voltage control V3
29-11-2017, 19:46 PM,
Post: #111
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Support for v4.08.31 added.
|
|||
Reputation: +1 - Bimmer540 [+1] | |||
11-12-2017, 14:16 PM,
Post: #112
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
This post was made with the purpose to bring this thread upfront.
In my opinion, it should be made "sticky", at least for the "poor" users (like me) of the "cheap" k+DCan interface. Thank you, Node, for the continuous support. |
|||
14-12-2017, 20:35 PM,
Post: #113
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Is the chance to work with v 4.09?
With 4.08 it works great. |
|||
14-12-2017, 20:42 PM,
(This post was last modified: 14-12-2017, 20:43 PM by Node.)
Post: #114
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
I'm currently on a business trip. Will make one for v4.09 as soon as I get back on Saturday.
|
|||
16-12-2017, 09:14 AM,
Post: #115
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Support for v4.09.13 added.
|
|||
Reputation: +7 - foxportal [+1] , Bimmer540 [+1] , Twoone [+1] , Loliceman [+1] , mattydr67 [+1] , simonchs [+1] , DJenka [+1] | |||
23-12-2017, 18:58 PM,
Post: #116
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Hi Node,
Thanks for your hard work. I read in first post "P.P.S. This utility works without any issues with original ISTA+, standalone not necessary." but I wonder if I could use this utility with Ista 4.09 Standalone. I am using Windows 10 64bit, ISTA-D 4.09.13 Standalone (installed in dRheingold) and k+dcan cable (STD:OBD). I have installed Patched Ediabas 7.3.0. - renamed original obd32.dll to obd32.ebas.dll - copied obd32.dll from version 3.0 in c:\Ediabas\Bin - copied NodeISTAVoltageControl.dll in c:\Ediabas\Bin - replaced original IstaOperation.exe with IstaOperation.exe (from folder 4.09.13) in D:\Rheingold\TesterGUI\Bin\Release. - inserted AllowFakeISTAOperation.reg into registry. ISTA is working without problems but voltage of KL15/KL30 are showing "-". Any help ? If I helped you please press thanks + rep button
|
|||
23-12-2017, 19:08 PM,
Post: #117
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
(23-12-2017, 18:58 PM)kn6600 Wrote: Hi Node,you have to put NodeISTAVoltageControl.dll in D:\Rheingold\Ediabas\bin |
|||
23-12-2017, 19:29 PM,
(This post was last modified: 23-12-2017, 19:40 PM by kn6600.)
Post: #118
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
(23-12-2017, 19:08 PM)Twoone Wrote: you have to put NodeISTAVoltageControl.dll in D:\Rheingold\Ediabas\bin I moved NodeISTAVoltageControl.dll from c:\ediabas\bin to D:\Rheingold\Ediabas\bin, Also renamed obd32.dll to obd32.ebas.dll in D:\Rheingold\Ediabas\bin and copied obd32.dll for V3 to D:\Rheingold\Ediabas\bin. With this voltage control working. Thanks. If I helped you please press thanks + rep button
|
|||
11-01-2018, 15:39 PM,
Post: #119
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Added support for v4.09.20.
|
|||
Reputation: +3 - Bimmer540 [+1] , foxportal [+1] , DJenka [+1] | |||
11-01-2018, 20:32 PM,
(This post was last modified: 11-01-2018, 20:34 PM by Stromag.)
Post: #120
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
(11-01-2018, 15:39 PM)Node Wrote: Added support for v4.09.20. Does it work now with the vcredist_xxx 2017? Because it is in the manual that works only with vcredist_xxx 2015 .. Because I had to install vcredist_xxx 2017 and the vcredist_xxx 2015 disappears, and the VoltageControl does not work anymore .. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Return to TopReturn to Content