Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA-D 4.09.20 Standalone
11-01-2018, 03:37 AM, (This post was last modified: 11-01-2018, 11:36 AM by spider80.)
Post: #1
XZBMW  ISTA-D 4.09.20 Standalone
ISTA-D 4.09.20 Standalone.

FASTA & HW check disabled.
License & regfiles included.

SQLiteDBs 4.09.21 (EN, DE, RU, OTHER).


Attached Files
ISTA-D 4.09.20.txt
File Type: .txt
Downloaded: 1,107 times
Size: 43 bytes

SQLiteDBs 4.09.21.rar
File Type: .rar
Downloaded: 768 times
Size: 16.73 KB


Don't forget press [Image: 655659acbccb82153e5bf498005c5711.gif] and [Image: 462af960d0477dcae1d2fa68fa59686f.gif], if my post helped you.
Remote install/update of diagnostic software
[Image: b0d366e737125313340a6a2af955e60e.gif]
Reputation: +53 - umutbulut [+1] , tonemoz [+1] , Bimmer540 [+1] , Kinsana [+1] , user_530d [+1] , jogi8850 [+1] , Lightred [+1] , autoraedarum [+1] , okolo [+1] , hulahans [+1] , kwork [+1] , Vojno [+1] , wlemi [+1] , harry015 [+1] , syrus [+1] , Twoone [+1] , M-Simon [+1] , edtech [+1] , Joe2 [+1] , Cowboy [+1] , Sabreace [+1] , montanus [+1] , Roo [+1] , DJenka [+1] , bmw335coding [+1] , samy_1985 [+1] , bobdinro [+1] , nanjue999 [+1] , TomoR [+1] , cryptocar [+1] , flint77 [+1] , simonchs [+1] , kregiel [+1] , uyusluy [+1] , JarsaR [+1] , DICKHILL [+1] , blackbm5xx [+1] , os1968 [+1] , ixot [+1] , tommaxx [+1] , starML [+1] , larshutten [+1] , tyrystor [+1] , ivica21 [+1] , rabihfiras [+1] , diagnosis service [+1] , ocostel [+1] , dominpl [+1] , RocketSurgeon [+1] , tecnijl [+1] , Tech206 [+1] , psya [+1] , bumek [+1]
Quote this message in a reply
[+] 249 users say Thank You to spider80 for this post
11-01-2018, 06:00 AM,
Post: #2
RE: ISTA-D 4.09.20 Standalone
These two lines will prevent ISTALauncherConsole from updating:

"DataVersion"="4.09.21"
"DataVersion_en-GB"="4.09.21"


Quote this message in a reply
12-01-2018, 01:28 AM,
Post: #3
RE: ISTA-D 4.09.20 Standalone
Which file contain these 2 lines???
Quote this message in a reply
12-01-2018, 02:14 AM, (This post was last modified: 12-01-2018, 02:15 AM by Almaretto.)
Post: #4
RE: ISTA-D 4.09.20 Standalone
(12-01-2018, 01:28 AM)dimitar Wrote:  Which file contain these 2 lines???

Reg Fix. Apply only if downloading SQLiteDB's directly and not using LauncherConsole.


Quote this message in a reply
12-01-2018, 06:34 AM,
Post: #5
RE: ISTA-D 4.09.20 Standalone
If I install the 4.09.20 and wants to work with the SDP data 4.09.12, I must then edit the Reg so SWI data 4.09.12 add or?
Quote this message in a reply
12-01-2018, 07:18 AM,
Post: #6
RE: ISTA-D 4.09.20 Standalone
(12-01-2018, 06:34 AM)Stromag Wrote:  If I install the 4.09.20 and wants to work with the SDP data 4.09.12, I must then edit the Reg so SWI data 4.09.12 add or?

If using ISTALauncherConsole to install, you do nothing to registry. If downloading and extracting to location, then you edit registry.

Any reason you do not want to use 4.09.20 SDP with 4.09.20 product version?


Quote this message in a reply
12-01-2018, 07:40 AM, (This post was last modified: 12-01-2018, 07:58 AM by Stromag.)
Post: #7
RE: ISTA-D 4.09.20 Standalone
(12-01-2018, 07:18 AM)Almaretto Wrote:  
(12-01-2018, 06:34 AM)Stromag Wrote:  If I install the 4.09.20 and wants to work with the SDP data 4.09.12, I must then edit the Reg so SWI data 4.09.12 add or?

If using ISTALauncherConsole to install, you do nothing to registry. If downloading and extracting to location, then you edit registry.

Any reason you do not want to use 4.09.20 SDP with 4.09.20 product version?

Yes, the reason is that there are always problems with the registry or launcher console, and it's easier to wait for the right data to download.
Also, I'm not familiar with the Launcher console and I do not know how it all works, so what ista version must be there, what data you need to insert so you can update etc ...

So is it possible to simply enter the Reg with SWI data 4.09.12 and later change the reg to 4.09.20 if the SDP data 4.09.20 are available?
Or does it make no difference whether the reg is SWI data 4.09.20, although only the SDP 4.09.12 are included?
Quote this message in a reply
12-01-2018, 10:12 AM,
Post: #8
RE: ISTA-D 4.09.20 Standalone
Hello!

You can use ISTA 4.09.20 with SDP 4.09.12 or vice versa without any problems. The reg entry should be correct, that's all.

But in my eyes it's absolutely easier to update the SDP via the launcher console than to download every time the full package with more than 50/60 GB. The latest update from 4.09.12 to SDP 4.09.20 was a small one (laucher console needed only 1 minute not more, managed the reg entrys etc.). Why should I download tons of bytes when I can do it fast and easy?

The launcher console here do the same job the launcher console on a BMW system would do. Okay, here we have a dos box and not a nice GUI, but the Job is the same. The only thing you cannot update with the dos box launcher console is ISTA itself. Here you have to install the new standalone version.

CU Oliver
Quote this message in a reply
12-01-2018, 10:30 AM, (This post was last modified: 12-01-2018, 10:32 AM by Stromag.)
Post: #9
RE: ISTA-D 4.09.20 Standalone
(12-01-2018, 10:12 AM)milkyway Wrote:  Hello!

You can use ISTA 4.09.20 with SDP 4.09.12 or vice versa without any problems. The reg entry should be correct, that's all.

But in my eyes it's absolutely easier to update the SDP via the launcher console than to download every time the full package with more than 50/60 GB. The latest update from 4.09.12 to SDP 4.09.20 was a small one (laucher console needed only 1 minute not more, managed the reg entrys etc.). Why should I download tons of bytes when I can do it fast and easy?

The launcher console here do the same job the launcher console on a BMW system would do. Okay, here we have a dos box and not a nice GUI, but the Job is the same. The only thing you cannot update with the dos box launcher console is ISTA itself. Here you have to install the new standalone version.

CU Oliver

Ok, so I just change the SWIData point from 4.09.20 to 4.09.12 in the Reg file when I use the SDP data 4.09.12?
If I make the update to SDP 4.09.20 with the launcher, do I have to change the reg file again to 4.09.20 but change before or after the update?
Quote this message in a reply
12-01-2018, 10:50 AM,
Post: #10
RE: ISTA-D 4.09.20 Standalone
Hello!

Th launcher console will do the trick for the registry.

CU Oliver
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  ista for use whit vcx se db8000 0 15 1 hour ago
Last Post: db8000
  ista 4.46 Standalone kiranabc 31 2,803 1 hour ago
Last Post: kiranabc
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 278 5 hours ago
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,264 Yesterday, 20:02 PM
Last Post: Node
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,646 627,311 Yesterday, 16:29 PM
Last Post: Sedoy
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,431 Yesterday, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 119 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 155 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 662 25-03-2024, 08:11 AM
Last Post: Node
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 322 121,434 24-03-2024, 23:45 PM
Last Post: armenh7

Forum Jump:


Users browsing this thread:
3 Guest(s)

Return to TopReturn to Content