[spanaz1]

Thanks very helpful post but mine is not OWLS and different from the Mondeo in your folder

---

I think the OWLS is for 2.0 16v zetec mine is V6 2.5

---

I think the OWLS is for 2.0 16v zetec mine is V6 2.5

[darek_naprawa]

Maybe this solution is for this ecu?
mondeo 1.8?
motor controller disconnected from the engine compartment (unscrewed plug)
immo is for the center console, under the radio, black big can
blocks engine start and fuel pump.
to cradle the box in two places connect the pins in the black plug.
one bridge to go the pump, through the can passes the plus circuit
the second bridge to create a starter that has an interrupted ground circuit.

[spanaz1]

You mean immo is not in ECU? my EEC is this one.

[kline]

Hello
To remove immo:
Remove 5-leg chip 7350FFB1, bridge 1 with 5 on board.
Join pins 24 and 27 (inhibitor relay)
cut pin 42 (led)
It's too late, but I hope it serves someone.
Greetings