Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How can connect digiprog 3 to pc and save the dumps?
04-04-2014, 13:40 PM,
Post: #1
|
|||
|
|||
How can connect digiprog 3 to pc and save the dumps?
How can connect digiprog 3 to pc and save the dumps?
|
|||
04-04-2014, 16:23 PM,
Post: #2
|
|||
|
|||
RE: How can connect digiprog 3 to pc and save the dumps?
(04-04-2014, 13:40 PM)14bogdan Wrote: How can connect digiprog 3 to pc and save the dumps? Download eetool for digiprog and install it. Install ftdi drivers. Connect digiprog to pc via usb and with external power supply. Go to device manager and check number of right port Go to digiprog-special functions and select pc term on run eetool software select right port and thats it..... |
|||
Reputation: +1 - daxxer [+1] | |||
04-04-2014, 16:45 PM,
Post: #3
|
|||
|
|||
RE: How can connect digiprog 3 to pc and save the dumps?
The program in the Annex, together with the description.
|