Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Yanhua mini ACDP programming tool
25-07-2018, 01:21 AM,
Post: #1
|
|||
|
|||
Yanhua mini ACDP programming tool
any news about Yanhua mini ACDP?
is it worth to buy ? |
|||
04-08-2018, 14:08 PM,
Post: #2
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
I got it since a week and i am excited
M35080 Programming needs some improvements, there are some bugs (tested on 4 dashs, and its better to desolder) Serial EEP 24XX, 25XX, 93XX, 95XX works like a charm (but tested on only 3 Eeps) Tried several CAS4 to Read with out any problems, Mileage reset works too CAS3 tested only 1 but readed without problem On a nother group they reported to create succesfully keys on FEM/BDC and CAS4 |
|||
05-08-2018, 13:46 PM,
Post: #3
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
I have baught form Eobdtool.co.uk - and have Problem wtih Authorization. Support is very bad. one week ago and don get a Authorization cant work wihtaut a Autohrizatin - every modul tha you bay must have extre a authorizaiton from your selller. |
|||
06-08-2018, 00:59 AM,
(This post was last modified: 06-08-2018, 01:05 AM by Chriz.)
Post: #4
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
Got a authorization problem too, but it was solved after 12-16 hours (only one authorization was missing)
Bought it direct from yanhua Support is over WhatsApp and so far very quick I will PM you number from my supporter Did you Updated your authorization after initial setup? |
|||
22-08-2018, 21:13 PM,
Post: #5
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
Has anyone installed it on pc?
|
|||
23-08-2018, 00:10 AM,
Post: #6
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
so whats the best place to buy it ?
|
|||
23-08-2018, 02:10 AM,
Post: #7
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
I bought it from ebay. Anywhere, just find good price
|
|||
23-08-2018, 02:12 AM,
Post: #8
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
are you using it everyday ,can you count on it?
|
|||
27-08-2018, 09:50 AM,
Post: #9
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
I just get it.
Reading eprom cas4 and make a key for f11 so far done. Cant say much more. cas4 reading eprom compared with vvdi reading and its matching 100% |
|||
30-08-2018, 20:03 PM,
Post: #10
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
nobody tested it on FEM/BDC with isn or key make?
does it will erase 35160,35080 eeprom? If this post helped you don't forget to press rep and thanks
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content