Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
FLASHING NBT
18-08-2018, 15:36 PM,
Post: #1
|
|||
|
|||
FLASHING NBT
Hello everyone so I’m attempting to flash a NBT on a bench harness I made using F30 FEM and Key. I followed the DIY flashing pdf guide but I’m sure this process requires additional steps.
Anyone with experience in the matter? Do I need to have a modified F30 fa when flashing ? The nbt is from a f10 should I use a F10 Fa when flashing ? |
|||
18-08-2018, 17:11 PM,
Post: #2
|
|||
|
|||
RE: FLASHING NBT
(18-08-2018, 15:36 PM)corpus Wrote: Hello everyone so I’m attempting to flash a NBT on a bench harness I made using F30 FEM and Key. I followed the DIY flashing pdf guide but I’m sure this process requires additional steps. Same process really Dont forget to add IBADeply too. You must use relevant FA of course. Use F10 FA if nbt goes to F1x F0x Use F25 FA if nbt goes to a F25. You wont even be able to code NBT if has F10 software in a F25 for example (more or less the exception here) |
|||
19-08-2018, 08:11 AM,
(This post was last modified: 19-08-2018, 08:13 AM by corpus.)
Post: #3
|
|||
|
|||
RE: FLASHING NBT
I have tried using F30 Fa and F10 Fa same result.
Other than Fem and key any other modules required to flash NBT ? Is there a way to update NBT using ISTA ? |
|||
23-08-2018, 08:29 AM,
Post: #4
|
|||
|
|||
RE: FLASHING NBT
(19-08-2018, 08:11 AM)corpus Wrote: I have tried using F30 Fa and F10 Fa same result.try esys. VIM HU_MGU-instruction for esys.
BMW FSC map update/CIC/NBT/NBTevo/EntryNav(Route) BMW FSC retrofit full set: CIC/NBT/NBTevo id4/5/6 screen mirroring Changing region map for EVO id 4/5/6+FullScreen apple carplay |
|||
24-08-2018, 12:12 PM,
(This post was last modified: 24-08-2018, 12:15 PM by corpus.)
Post: #5
|
|||
|
|||
RE: FLASHING NBT
(23-08-2018, 08:29 AM)BMWdriva Wrote:(19-08-2018, 08:11 AM)corpus Wrote: I have tried using F30 Fa and F10 Fa same result.try esys. esys is what I'm using.obviously I'm not doing something wrong. Anyone knows the process to recover NBT from a failed flash? |
|||
24-08-2018, 21:42 PM,
Post: #6
|
|||
|
|||
RE: FLASHING NBT
Tried putting new software and bootloader on?
blFlash: Flashes new Bootloader (BTLD) swDeploy: Flashes new Software (SWFL) cdDeploy: Encodes (e.g. VO Codes ECU, CAFD) ibaDeploy: used to update the Owners manual for HU (IBAD) |
|||
26-08-2018, 08:35 AM,
(This post was last modified: 26-08-2018, 08:36 AM by corpus.)
Post: #7
|
|||
|
|||
RE: FLASHING NBT
I'll give that a try
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content