[larshutten]

Go go ECU tree click on desired ecu and from there you remove the actions.

[bimmer71]

you have to goin  control module tree where it show each module the click on the moude  showing up in red or with a ? mark after you clickot module it should pop upa window click on second tab click hide option after a few  the scrolling lines will stop  and it hidden , roceed with any other in same way , and determine measure plan it will still say replace go go alnoe with it after a while it will redisplay  what istap is going to do it will go thru



hope this help good day thanks or rep if you don't mind only if it help you.

[willisodhiambo]

I tried this hide actions before and it never worked with a car that had issues with the most units. Ill try again and see.

[iyade46]

if ista p ask you to replace module then ista p see there is no connection to that ecu so it ask you to replce it to be sure look for radio in ecu tree there it it's marked as red so that is the problem
good luck
if you want help i can remotly help wiuth teamviewer