Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Kess volvo cable
21-05-2018, 12:53 PM,
Post: #1
|
|||
|
|||
kess volvo cable
kess cable 144300K264
need pinout to cable volvo edc16 and siemens thanks to all |
|||
21-05-2018, 13:50 PM,
Post: #2
|
|||
|
|||
RE: Kess volvo cable
Just connect the blue wire to ECU pin 43 for edc16...
|
|||
21-05-2018, 16:44 PM,
Post: #3
|
|||
|
|||
RE: Kess volvo cable
|
|||
21-05-2018, 18:50 PM,
(This post was last modified: 21-05-2018, 18:50 PM by Mex165.)
Post: #4
|
|||
|
|||
RE: Kess volvo cable
On your Kess V2 OBD Cable you have a Cable sticking out…!
You take the blue wire/Cable and connect one end to K-Line pin on ECU and the other end to the Cable sticking out of your Kess V2 OBD Cable...! |
|||
18-06-2018, 18:11 PM,
(This post was last modified: 18-06-2018, 18:20 PM by SFR.)
Post: #5
|
|||
|
|||
RE: Kess volvo cable
is this the same for siemens sid ecu? and is that the reason i get checksum error at end of reading file?
if i put the file into winols it says checksum ok if i then use ecu safe to remove dpf, then correct checksum with winols and then try and write file to ecu it wont let me, says checksum error yet win ols says cs ok?? im using kess 5.017 and ksuite 2.47 car is a 2005 Volvo S40 2.0d cheers |
|||
29-09-2018, 17:30 PM,
Post: #6
|
|||
|
|||
RE: Kess volvo cable
will not anyone share this one pinout cable 144300K264
|
|||
30-09-2018, 08:29 AM,
Post: #7
|
|||
|
|||
RE: Kess volvo cable
Just buy one and open it!
There isn`t any info on this pinout, that I can find… So go deeper in the search or buy and dissect |
|||
12-06-2019, 20:40 PM,
(This post was last modified: 12-06-2019, 20:56 PM by pocinas.)
Post: #8
|
|||
|
|||
RE: Kess volvo cable
Just connect the blue wire to ECU pin 43 for edc16...
(21-05-2018, 18:50 PM)Mex165 Wrote: On your Kess V2 OBD Cable you have a Cable sticking out…! i measured this Cable sticking out and going just to DB25 plug and pin 11, so when is OBD2 cable plug into CAR then KLINE signal should go to 10 and 11 pin db25 or just 11? So in theory VOLVO cable is just changed K-line signal ?... in Standard CAN kline pin7 OBD2 plug going to db25 pin 10, in Volvo cable going to DB25 pin 11 RIGHT? or 10 and 11, or something diffrent. Question is.. example Bosh EDC16c34 dont have communication for CAN than? My post helps you? Please Hit REPUTATION and THANKS Buttons
|
|||
18-08-2019, 20:11 PM,
Post: #9
|
|||
|
|||
RE: Kess volvo cable
does any one know about kess v2 volvo trw cable pin out
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
kess v2 clone - support write me7.1.1 ? | CenturionM | 1 | 43 |
03-06-2024, 21:08 PM Last Post: CenturionM |
|
Volvo v50 edc16c34 stage1 | tommy999 | 1 | 33 |
03-06-2024, 18:49 PM Last Post: rece1p23 |
|
VOLVO V60 EGR OFF | jtdpow | 1 | 52 |
29-05-2024, 05:35 AM Last Post: Ryzen |
|
volvo EDC17CP22 STAGE 1 | murkutis | 2 | 95 |
28-05-2024, 17:38 PM Last Post: gkogkolos |
|
VOLVO DPF OFF | alisyne | 1 | 46 |
28-05-2024, 13:04 PM Last Post: Ryzen |
|
Change CID SD card kess V2 | TTk | 3 | 1,120 |
27-05-2024, 06:18 AM Last Post: evgenijm |
|
Red pcb kess 5.017 sd card image (files) | stunt_rider | 16 | 13,920 |
26-05-2024, 09:28 AM Last Post: little john |
|
volvo denso egr off | aboelgood | 1 | 63 |
17-05-2024, 10:40 AM Last Post: baatouz |
|
Volvo XC90 Denso Start Stop off | kachorok | 1 | 82 |
15-05-2024, 21:36 PM Last Post: kachorok |
|
volvo edc15c11 egr | jurscam | 1 | 64 |
11-05-2024, 06:42 AM Last Post: Ryzen |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content