Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Can't load fake FSC SIG_CHECK_FAILURE
28-11-2018, 09:14 AM,
Post: #31
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
(28-11-2018, 08:13 AM)duckdonald Wrote: are you installing FSC patch, or FSC oem? Great! Your .bin has successfully installed all FSCs automatically. I used HUTool 2.6 before, and it can be done limited..... I always thought that "HU_SPECIAL_NBTEVO_REPAIR_NAND" was able to lift the restrictions of Compoent Protection. It seems that my understanding is wrong~ I am curious, do you have to rely on the .bin file to remove the CP restriction? Is there any other SSH command or _DEV_UDS.prg that can be done? Duckdonald, thank you very much. |
|||
29-11-2018, 00:45 AM,
Post: #32
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
Still no luck for me
1. I deleted manually Component Protection using SSH 2. Erased IPC partition/eeprom (that process also deleted VIN number) 3. Went back to istep 59 Still wont load FSC files. Now I just noticed, right after I load a fsc file, Component Protection becomes active. WTH. Is this unit VIN locked now? This is the 3rd VIN I am using on that unit. Any idea? |
|||
02-12-2018, 08:21 AM,
Post: #33
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
My HU Component Protecton is active now, i can not remove it.
0xB7F87A Komponentenschutz aktiv Testbedingungen erfüllt Fehler gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is no event DTC. This ecu IS RESPONSIBLE for this error entry. Error code: B7 F8 7A 68 Maybe I need to use BIN to remove component protection (because I don't know what Shell Script can do), if you have .bin or other solutions, please PM me pricing |
|||
02-12-2018, 12:05 PM,
Post: #34
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
you can use the .bin that I had already given you.
with that you can remove CP. BMW TECHNICAL SERVICE INFORMATION - ITALY <> Full map update download all the world BMW FSC RETROFIT complete set: CIC / NBT / NBTevo id4/5/6 (Carplay included) - NBTevo VIM Map code Premium - Motion - Move - Route - Next - Evo ID4 |
|||
02-12-2018, 12:16 PM,
Post: #35
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
(02-12-2018, 12:05 PM)duckdonald Wrote: you can use the .bin that I had already given you. I have used and tried it several times, but the CP is still activated. ( all fsc is accepted ) I also tried to clear the fault code using Tool32 and ISTA+. In addition, the problem about blank screen after animation is still there, so I don't know how to continue. |
|||
02-12-2018, 15:00 PM,
Post: #36
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
(02-12-2018, 12:16 PM)smallnet Wrote:(02-12-2018, 12:05 PM)duckdonald Wrote: you can use the .bin that I had already given you. If all FSC are accepted that means CP is not active, bit confusing your statement, unless I missed something Blank screen is typical of badly performed region changed units. Tricky to fix. Might need to install a new chip. Someone will help you hopefully, I can't help to fix this particular issue I am afraid. |
|||
02-12-2018, 15:16 PM,
Post: #37
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
(02-12-2018, 15:00 PM)bmwcoder75 Wrote: If all FSC are accepted that means CP is not active, bit confusing your statement, unless I missed something This function should not need to replace chip? (I don't have this software, just the pictures I took on the website.) |
|||
02-12-2018, 15:44 PM,
Post: #38
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
(02-12-2018, 15:16 PM)smallnet Wrote:(02-12-2018, 15:00 PM)bmwcoder75 Wrote: If all FSC are accepted that means CP is not active, bit confusing your statement, unless I missed something As far as I know this would only perform a partial change. DVD region won't be changed in the process with that script. Same problem with FSCMAP etc. |
|||
12-12-2018, 12:37 PM,
Post: #39
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
Hello,
I have exactly the same problem, when I read the error codes with Esys I have the following values: 63->F4 59 02 7F B7 F8 05 2F B7 F8 09 2F B7 F8 50 2F B7 F8 B8 2F B7 F8 1A 2F B7 F8 E5 2F B7 F8 7A 2F B7 F8 7A = Component protection I manage to load the FSC files with Esys, the navigation is active during 3, 4 minutes and then I lose all the options. When I read the status FSC all are in the state "canceled". Does anyone have a solution to correct this problem? |
|||
12-12-2018, 13:44 PM,
Post: #40
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
You have FSC oem, or FSC custom?
BMW TECHNICAL SERVICE INFORMATION - ITALY <> Full map update download all the world BMW FSC RETROFIT complete set: CIC / NBT / NBTevo id4/5/6 (Carplay included) - NBTevo VIM Map code Premium - Motion - Move - Route - Next - Evo ID4 |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content