Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Anyone got those CAS4 ignition generators USB CAN Bus devices?
30-01-2019, 13:42 PM,
(This post was last modified: 30-01-2019, 13:43 PM by bmwcoder75.)
Post: #1
|
|||
|
|||
Anyone got those CAS4 ignition generators USB CAN Bus devices?
Hello, I bought a few of these from 2 different seller actually
https://www.aliexpress.com/item/USB-to-C...4c4dyc3SQw Only 1 device worked. When I send packets RED led blinks and I can capture packets from the CAN network. From this one working device only (I bought 4 from same seller, only one worked) Now all the other devices do not work at all, they are detected by Windows but that's it, when sending packets, nothing happens, no LED light blinks, when listening to CAN bus, they do not capture anything. I got 6 devices in total, basically only one worked. What the heck guys, anyone had troubles like this too or is it just me? Any recommendation, maybe an Ardnuino type of CAN filter would be more reliable? I need to be able to code and flash on a bench. So I need Clamp 15 signal too. |
|||
30-01-2019, 14:46 PM,
Post: #2
|
|||
|
|||
RE: Anyone got those CAS4 ignition generators USB CAN Bus devices?
There was a program called CANhacker which should work with an INPA USB lead and was able to send CAN data, but I haven't played around with it too much.
|
|||
31-01-2019, 17:16 PM,
Post: #3
|
|||
|
|||
RE: Anyone got those CAS4 ignition generators USB CAN Bus devices?
I flushed NBT and NBT EVO on the bench several times with the same adapter.
Software uses "USB CAN 5.0" on WINDOWS 10. |
|||
31-01-2019, 17:21 PM,
Post: #4
|
|||
|
|||
RE: Anyone got those CAS4 ignition generators USB CAN Bus devices?
USB2CAN from 8devices works very reliable too to send 15WUP message.
If my post was helpful to you please give me a thanks and/or reputation
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content