Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ RDC wake-up tools, tester
08-05-2019, 09:49 AM,
(This post was last modified: 26-06-2019, 00:24 AM by Clusters.)
Post: #1
|
|||
|
|||
RDC wake-up tools, tester
Vojnó
Press Thanks and reputation if this post helped you. |
|||
10-05-2019, 07:06 AM,
Post: #2
|
|||
|
|||
RE: RDC wake-up tools, tester
|
|||
Reputation: +1 - Vojno [+1] | |||
11-05-2019, 22:19 PM,
Post: #3
|
|||
|
|||
RE: RDC wake-up tools, tester
(10-05-2019, 07:06 AM)14TLC Wrote: Orange Electronic EL-50448 I've already ordered. I'll refer you when you come and try it out. Vojnó
Press Thanks and reputation if this post helped you. |
|||
11-05-2019, 22:33 PM,
Post: #4
|
|||
|
|||
RE: RDC wake-up tools, tester
I have two EL-50448 and use them almost daily on GM, they work perfectly. Both of them $20.00 clones.
Didn't know they worked on other stuff, bought them primarily because I live in a Chevy Truck town where people swap winter wheels every year. If someone took the time to help you, the least you can do is take a few seconds and press two buttons!
Thanks + reputation. |
|||
Reputation: +2 - Vojno [+1] , zeromoto [+1] | |||
12-05-2019, 20:07 PM,
(This post was last modified: 12-05-2019, 20:08 PM by Vojno.)
Post: #5
|
|||
|
|||
RE: RDC wake-up tools, tester
(11-05-2019, 22:33 PM)Clusters Wrote: I have two EL-50448 and use them almost daily on GM, they work perfectly.the question is, does it work on BMW Motorbike? I'm working only with BMW. (11-05-2019, 22:33 PM)Clusters Wrote: bought them primarily because I live in a Chevy Truck town where people swap winter wheels every year. Are you from Texas? Vojnó
Press Thanks and reputation if this post helped you. |
|||
12-05-2019, 20:25 PM,
Post: #6
|
|||
|
|||
RE: RDC wake-up tools, tester
Nope, small town of 6000 in Canada, only a GM dealer here so everyone drives GM trucks.
If someone took the time to help you, the least you can do is take a few seconds and press two buttons!
Thanks + reputation. |
|||
12-05-2019, 20:38 PM,
Post: #7
|
|||
|
|||
RE: RDC wake-up tools, tester
Then do you have a great experience with GM?
Vojnó
Press Thanks and reputation if this post helped you. |
|||
12-05-2019, 20:48 PM,
Post: #8
|
|||
|
|||
RE: RDC wake-up tools, tester
Only for about 50 years.
A little research and I found the EL-50448 should work fine to wake up your sensors. The ATEQ VT15 is basically the same tool only a lot more expensive. If someone took the time to help you, the least you can do is take a few seconds and press two buttons!
Thanks + reputation. |
|||
12-05-2019, 21:00 PM,
Post: #9
|
|||
|
|||
RE: RDC wake-up tools, tester
You can be so old?
btw. what parameters do the TPS valves have? otherwise: if I want one which reads the sensor ID, which is the right one? Vojnó
Press Thanks and reputation if this post helped you. |
|||
12-05-2019, 21:12 PM,
Post: #10
|
|||
|
|||
RE: RDC wake-up tools, tester
I started working on cars at about 15 years old.
My tool (and the ATEQ tools) broadcasts 125 kHz relearn frequency to wake the sensor up, most of the GM sensors I have seen are Schrader. The operating frequency has changed from 315MHz to 433MHz, but the relearn frequency has remained the same. To read the sensor ID you need more than a wake up tool, but the ID # should be printed on the sensor. Any TPMS tool capable of reading ID will work, like an Autel will read them but you can only program new Autel sensors with it. To do universal new sensor programming, you would need an expensive tool like the Bartech, ATEQ, or the like. Unlocked to do any sensor, they aren't cheap. Most tools are locked to their own brand of sensors. If someone took the time to help you, the least you can do is take a few seconds and press two buttons!
Thanks + reputation. |
|||
Reputation: +1 - Vojno [+1] | |||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Diagnostic tools for BMW motorbike | Elaine2366 | 2 | 4,052 |
18-01-2017, 19:53 PM Last Post: ferrum |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content