Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Etka 8.1 update 1300 fails
|
03-08-2019, 07:17 AM,
Post: #1
|
|||
|
|||
Etka 8.1 update 1300 fails
Running Etka 8.1 in 64 bit Windows with emulator. Has been working fine until this week. I am at 1299 and 1300 downloads and tries to install. I get about 8 messages about Process Exists and then finally says Update failed (on both VW and Audi). Any suggestions?
Joe |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
03-08-2019, 12:01 PM,
Post: #2
|
|||
|
|||
RE: Etka 8.1 update 1300 fails
(03-08-2019, 07:17 AM)jpetersack Wrote: Running Etka 8.1 in 64 bit Windows with emulator. Has been working fine until this week. I am at 1299 and 1300 downloads and tries to install. I get about 8 messages about Process Exists and then finally says Update failed (on both VW and Audi). Any suggestions? all good for me. just updated my etka yesterday. |
|||
|
|
|
04-08-2019, 11:14 AM,
Post: #3
|
|||
|
|||
|
RE: Etka 8.1 update 1300 fails
same here, 1300 works without any problem
|
|||
|
|
|
04-08-2019, 11:30 AM,
Post: #4
|
|||
|
|||
|
RE: Etka 8.1 update 1300 fails
Delete the file and download it again.
|
|||
|
|
|
07-08-2019, 20:10 PM,
Post: #5
|
|||
|
|||
|
RE: Etka 8.1 update 1300 fails
I have tried this many times. The VW update works fine but the Audi 1300 one fails. Running the diagnostic is says there is a crcerrora error message. Is there any way to reinstall 1299 in case that is really the problem?
Joe |
|||
|
|
|
08-08-2019, 07:38 AM,
Post: #6
|
|||
|
|||
|
RE: Etka 8.1 update 1300 fails
my also working good
today 1301 and no problem with update |
|||
|
|
|
08-08-2019, 08:06 AM,
Post: #7
|
|||
|
|||
|
RE: Etka 8.1 update 1300 fails
...here too --> VW/AUDI update1301 works great !
I had problem with Audi 1300, too -> as SeedStorm says: download complete again... |
|||
|
|
|
10-10-2019, 07:09 AM,
Post: #8
|
|||
|
|||
|
RE: Etka 8.1 update 1300 fails
Hello
I have a problem with etka 8.1 update 1309 does not pass help me please thanks how to do it please |
|||
|
|
|
15-10-2019, 12:20 PM,
Post: #9
|
|||
|
|||
RE: Etka 8.1 update 1300 fails
(10-10-2019, 07:09 AM)hab febigolf Wrote: Hello Take a look: https://cartechnology.co.uk/showthread.p...#pid479213 Important note: no support and no activations by pm!
![[Image: wait.gif]](https://cartechnology.co.uk/images/smilies/wait.gif) |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
|
Audi A6 C8 7-speed gearbox software update versions. | audimees | 0 | 65 |
07-06-2024, 18:44 PM Last Post: audimees |
| Audi a3 8v update | on313no | 10 | 347 |
23-05-2024, 14:57 PM Last Post: on313no |
|
| PETKA 8.3 UPDATE 8.6 | omarzoro | 9 | 854 |
18-05-2024, 20:29 PM Last Post: Diaginstall |
|
|
|
MIB3 3GB035866B firmware update | wanglejin | 0 | 172 |
20-04-2024, 03:17 AM Last Post: wanglejin |
| SKODA OCTAVIA A8 MY2023 infotainment update file | giannis20vt | 3 | 332 |
02-04-2024, 16:35 PM Last Post: giannis20vt |
|
| PETKA 8.6 Update Patch by XTR3M3 | hartar197 | 25 | 8,166 |
17-03-2024, 17:11 PM Last Post: jcd |
|
|
|
VW ID.4/ID.6 Gateway Update | JoZerByte | 3 | 311 |
13-03-2024, 01:09 AM Last Post: JoZerByte |
| ODIS 4.3.3 Update 51.0.670 | wg969 | 11 | 4,119 |
06-03-2024, 15:54 PM Last Post: BigNode |
|
|
|
Audi MMI 3G High update, help please | XuLeTZ | 5 | 294 |
26-02-2024, 20:36 PM Last Post: pupu144 |
| Disable update in Odis | BIMMERSIMBA | 5 | 474 |
21-01-2024, 01:01 AM Last Post: c20091929 |
|
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Return to TopReturn to Content
