[Archangel]

Hi guys.

Need 100% immo off solution for Peugeot 206CC 1.6i from 2001 with AC and with ME7.4.4 ECU, HW 0261206942 and SW 1037367868.

Have tried IUD3.2 Flash and tried both Eeprom v1 which car starts but engine light on and P1613 , P1615 and revs won't go over 3000Rpm.
Eeprom v2 doen's start.

Can somemone kindly help me out.

Attached are both ori 29F400 flash and instead of 95160 soic 8 eeprom, it has Fairchild B13AB / 25C16 / 0VM8 in it's place, but that should not be the problem, or should?!

Using Ktag to read and write.

Kindly advise.
Brs.

[bkjbig]

Hi, with the first eprom V1 you have to adapt motorized butterfly with diagnosis (LAUNCH or LEXIA)

[Abou-raffik]

here tested solution

[Archangel]

Hi, with the first eprom V1 you have to adapt motorized butterfly with diagnosis (LAUNCH or LEXIA)

Hi BKJBIG.

I don't have Lexia nor Launch.
I do have Maxidas DS 808. Not sure if it has that function for Peugeot as Autel lacks many functions, but will check.

[Archangel]

Perfect.
Worked fine.

here tested solution