Possibly Related Threads…

***Yhoni*** · (This post was last modified: 11-09-2019, 12:51 PM by Clusters.)

Hello friends, can anyone help me to remove the immobilizer from these files extracted to a Bosch ECU 0 261 208 101 ME7.4.4 from a Peugeot 206 1.6 16v?

Or tell me what tool should I use to remove the immobilizer?

Thank you very much

***Abou-raffik*** · 08-09-2019, 12:24 PM,

i dont see your thread look here post #13

https://cartechnology.co.uk/showthread.p...041&page=2

***migmig85*** · 08-09-2019, 19:13 PM,

Check this solution and give report.
Pass in PM.

***Yhoni*** · 10-09-2019, 11:35 AM,

(08-09-2019, 19:13 PM)migmig85 Wrote: Check this solution and give report.
Pass in PM.

Thanks migmig85 but the car does not start with any combination of your files.

Do you know any program that I can use to remove the immobilizer from the original files?

Thanks for sharing.

***Abou-raffik*** · 10-09-2019, 13:34 PM,

hi brother with all this good and tested solution and not working for you ....REALY STRANGE.
i think you have another problem bad chips or ecu i dont know .
sorry brr i make stop for this thread maybe somone will give you solution that i havnt.

***bbiird*** · 10-09-2019, 20:26 PM,

look here
Psa bosch 7.4.4 immo off
https://cartechnology.co.uk/showthread.php?tid=55904

***Yhoni*** · (This post was last modified: 11-09-2019, 12:50 PM by Clusters.)

(10-09-2019, 13:34 PM)BOULEFAA Wrote: hi brother with all this good and tested solution and not working for you ....REALY STRANGE.
i think you have another problem bad chips or ecu i dont know .
sorry brr i make stop for this thread maybe somone will give you solution that i havnt.

Hello Boulefaa, I also came to think that something was happening after having programmed the flash memory and the eeprom up to 6 times with the different files shared by colleagues in the forum and without starting the car but today I recorded the files shared by the partner from another forum and the car has started without problem.

In this way I can take the problem for granted but I am not aware of the difference between the files shared here and the file shared by "mnem".

Could you tell me what program you use to clear the immobilizers of the ECU?

Thank you.

(10-09-2019, 20:26 PM)bbiird Wrote: look here
Psa bosch 7.4.4 immo off
https://cartechnology.co.uk/showthread.php?tid=55904

Hi bbiird, I already solved the problem with some files shared on other forum

Thank you very much anyway for sharing your files too.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Solved ✔ Simos 3PA - Skoda Fabia 1.4 immo off	RSMtune_remap	5	66	4 hours ago Last Post: RSMtune_remap
	Solved ✔ Citroen Berlingo edc15c2 single connector immo	fluorescent	11	124	5 hours ago Last Post: fluorescent
	MB 200 cdbi EDC166C32 Immo off	gi61	3	43	6 hours ago Last Post: evgenijj
	checksum or immo off please	BoNzO	1	44	Yesterday, 14:01 PM Last Post: aboelgood
	SIMOS 10.10 IMMO TRANSFER	victorysatgr	10	110	Yesterday, 13:53 PM Last Post: victorysatgr
	piaggio beverly 300 32m3g1 immo off	etecuprom	0	19	Yesterday, 07:11 AM Last Post: etecuprom
	VW turan 1.4 MED17.5.1 eeprom immo off	FinnY	2	38	Yesterday, 06:12 AM Last Post: FinnY
	Tata safari from 2008 immo baypass	dankocg	0	16	31-05-2024, 18:45 PM Last Post: dankocg
	Solved ✔ hi friends i nees help for immo off dacia logan ecu valeo v42	Iprogplus	2	38	31-05-2024, 15:47 PM Last Post: Iprogplus
	Fiat ducato Marelli 9df Immo Off	aboelgood	1	37	31-05-2024, 15:35 PM Last Post: raffy haddad

Contact Us