Possibly Related Threads…

***ctgy8923*** · 27-01-2022, 23:30 PM,

(27-01-2022, 23:20 PM)Caltech Wrote: Hello,

I also have problems connecting to 2 different G01 chassis vehicles. I have an ICOM and it will read the VIN and PAD status on the menu bar. But after vehicle ID, it starts asking me to change the PAD status and it will show the status on the menu bar, but ISTA will still ask me if I have changed the status. In the end, all modules show red and no communications with the modules. I have tried uninstalling and installing an older version but same thing. My ICOM works on another laptop fine, so I think it must be my laptop or the install. Any ideas how to fix this? Thanks.

Your ICOM works on another laptop fine with the same 2 different G01 chassis cars?

Asking because i also have two G01 X3's and no issue, so just trying to see you are okay with those 2 G01's with the another laptop. Thanks.

***Caltech*** · (This post was last modified: 28-01-2022, 04:29 AM by Caltech.)

(27-01-2022, 23:30 PM)ctgy8923 Wrote:
(27-01-2022, 23:20 PM)Caltech Wrote: Hello,

I also have problems connecting to 2 different G01 chassis vehicles. I have an ICOM and it will read the VIN and PAD status on the menu bar. But after vehicle ID, it starts asking me to change the PAD status and it will show the status on the menu bar, but ISTA will still ask me if I have changed the status. In the end, all modules show red and no communications with the modules. I have tried uninstalling and installing an older version but same thing. My ICOM works on another laptop fine, so I think it must be my laptop or the install. Any ideas how to fix this? Thanks.

Your ICOM works on another laptop fine with the same 2 different G01 chassis cars?

Asking because i also have two G01 X3's and no issue, so just trying to see you are okay with those 2 G01's with the another laptop. Thanks.

Correct. On the same G01's it works on another laptop and an older 2019 build of ISTA. Also I am using an OE ICOM.

(27-01-2022, 23:25 PM)Node Wrote:
(27-01-2022, 23:20 PM)Caltech Wrote: Hello,

I also have problems connecting to 2 different G01 chassis vehicles. I have an ICOM and it will read the VIN and PAD status on the menu bar. But after vehicle ID, it starts asking me to change the PAD status and it will show the status on the menu bar, but ISTA will still ask me if I have changed the status. In the end, all modules show red and no communications with the modules. I have tried uninstalling and installing an older version but same thing. My ICOM works on another laptop fine, so I think it must be my laptop or the install. Any ideas how to fix this? Thanks.

Would be much easier if you would provide ISTA log. Or do you want us to play guessing game?

Well, then my first guess: don't know if it troubles G series, but for F series you had to set "ethernet as preferred communication channel when connected via ICOM" to no in ISTA. Especially if your ICOM is a clone and has faulty/missing car ethernet.

So, did I win?

I would be happy to provide a log. I just don't know how to do that. If you're able to help indicate where to find the log, I would post it. Thank you. I will check this setting tonight. I just don't have a car to test it on right now. So maybe I can get a log next time assuming I find out how, if it's still not working by then.

***bmw335coding*** · 29-01-2022, 10:08 AM,

Why we need to pm another user for get an downloadlink?

***Sedoy*** · 29-01-2022, 10:10 AM,

(29-01-2022, 10:08 AM)bmw335coding Wrote: Why we need to pm another user for get an downloadlink?

Why not? Worksharing?!

***willisodhiambo*** · 30-01-2022, 17:42 PM,

i have a strange problem and might have to go back to 4,28. I installed the latest and got licence from Sedoy but after I paste the license the next and finish buttons remain greyed out so I cant complete the process. Cleared registry, reinstalled but still the same. Any ideas?

***Twointje*** · 30-01-2022, 19:00 PM,

(30-01-2022, 17:42 PM)willisodhiambo Wrote: i have a strange problem and might have to go back to 4,28. I installed the latest and got licence from Sedoy but after I paste the license the next and finish buttons remain greyed out so I cant complete the process. Cleared registry, reinstalled but still the same. Any ideas?

Are you sure you proçvided the complete code to Sedoy , or copied the complete license to paste in Ista?? I had this one time the buttons stayed greyed out but it was my fault i did nod copied the complete license that Sedoy had provided for me..

***papachivas*** · 30-01-2022, 21:14 PM,

(30-01-2022, 17:42 PM)willisodhiambo Wrote: i have a strange problem and might have to go back to 4,28. I installed the latest and got licence from Sedoy but after I paste the license the next and finish buttons remain greyed out so I cant complete the process. Cleared registry, reinstalled but still the same. Any ideas?

Hello, have you tried to delete the records of the old version manually on the computer, I already had this problem and I also had to redo everything again, be careful with the automatic translation when copying the key copy it to notepad and especially when copying the license if you have automatic translator it will give an error in the license I had this problem

***willisodhiambo*** · (This post was last modified: 31-01-2022, 06:03 AM by willisodhiambo.)

(30-01-2022, 19:00 PM)Twointje Wrote:
(30-01-2022, 17:42 PM)willisodhiambo Wrote: i have a strange problem and might have to go back to 4,28. I installed the latest and got licence from Sedoy but after I paste the license the next and finish buttons remain greyed out so I cant complete the process. Cleared registry, reinstalled but still the same. Any ideas?

Are you sure you proçvided the complete code to Sedoy , or copied the complete license to paste in Ista?? I had this one time the buttons stayed greyed out but it was my fault i did nod copied the complete license that Sedoy had provided for me..

I did, made sure I had copied in in full even did a file compare

(30-01-2022, 21:14 PM)papachivas Wrote:
(30-01-2022, 17:42 PM)willisodhiambo Wrote: i have a strange problem and might have to go back to 4,28. I installed the latest and got licence from Sedoy but after I paste the license the next and finish buttons remain greyed out so I cant complete the process. Cleared registry, reinstalled but still the same. Any ideas?

Hello, have you tried to delete the records of the old version manually on the computer, I already had this problem and I also had to redo everything again, be careful with the automatic translation when copying the key copy it to notepad and especially when copying the license if you have automatic translator it will give an error in the license I had this problem

I dont have a translator, yes, copied it to notepad and still nothing. I have reinstalled twice. Gave up, might try again in future.

***gente*** · 31-01-2022, 08:04 AM,

...the latest version without license is the 4.32.12, you can fix registry to work with newest DB and SDP.

LG Thomas

***nixte*** · 31-01-2022, 08:21 AM,

When will be available Ista_standalone_installer 4.33.30? with full psdzdata?
Thanks

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	ISTA issues on G05 X5	330d	5	95	1 hour ago Last Post: 330d
	ISTA Standalone Licenserequest up to v4.37.4x	Sedoy	8,769	703,069	1 hour ago Last Post: Sedoy
	ISTA 4.33.30 The programming system could not be initialised	Edward1968	40	8,478	Yesterday, 09:50 AM Last Post: iyade46
	need lastest copy of PSdZData_Lite	iyade46	1	55	Yesterday, 07:42 AM Last Post: Edward1968
	ISTA 4.46.xx problems and possible solution	Sedoy	131	16,212	31-05-2024, 13:32 PM Last Post: CATAHA
	Update ISTA at once 4.43.40 (ISTA Update Program)	charlesjyw	42	8,816	30-05-2024, 19:52 PM Last Post: mars13
	ISTA+ 4.47.3x Install Files - MEGA	shawnsheridan	11	1,844	29-05-2024, 04:50 AM Last Post: ivanp
	Lowering g05 lci with ista	Zenel6GT	16	760	28-05-2024, 12:59 PM Last Post: NeRkO20
	ISTA 4.47 programming N/A	Neon10	7	483	28-05-2024, 07:46 AM Last Post: Thomas77
	ISTA 4.46.30 can't finish the diagnosis	spiridon	1	215	28-05-2024, 07:32 AM Last Post: flterence

Contact Us