Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
HU_Entry to HU_NBT Coding Help!
|
08-02-2022, 03:46 AM,
(This post was last modified: 08-02-2022, 08:26 AM by vav395.)
Post: #1
|
|||
|
|||
HU_Entry to HU_NBT Coding Help!
Hello guys,
I am upgrading my car with swapping hu_entry to hu_nbt. What I did is In the bottom, add 609 and change 6NH to 6NS. Click apply. Calculate FP again. Save. Go to Expert Mode >> VCM >> Load the saved FA file in the bottom section, file tab >> Right-click FA and Calculate FP >> Go to VCM Master tab >> write FA FP. However , when I try to do VO code for HU_NBT and Kombi as those steps bellow Expert Mode >> Coding >> Read FA (VO) >> Activate FA (VO) >> Read SVT (VCM) >> Left-Click on HU_NBT >> "Detect CAF for SWE" >> Select the latest CAFD displayed >> OK >> Right-Click on HU_NBT (the ECU itself not the underlying CAFD) => CODE The Detect CAF for SWE is greyed out!! I'm using esys 3.27.1 with 4.43 pdz lite. Any info would be APPRECIATED. ############################################################# UPDATE: The 3.30 works for me. Thank you guys. However, it still showed BKOMBI not KOMBI. The bluetooth streaming music from phone and aux connected using usb isn't working. ############################################################# UPDATE: The Bluetooth mic and antenna turned out they are currently hooked up directly to combox (I didn't know that). I will try to unhook them and wire them directly to Headunit. I still don't why aux usb isn't working Thanks. |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
08-02-2022, 04:07 AM,
Post: #2
|
|||
|
|||
|
RE: HU_Entry to HU_NBT Coding Help!
You cant use latest pdszdata with 3.27,,,,, Change esys version
|
|||
|
|
|
08-02-2022, 05:41 AM,
Post: #3
|
|||
|
|||
|
RE: HU_Entry to HU_NBT Coding Help!
Try use e-sys 3.30
- Secure coding (NCD 2.0) fit to FA changed (Typschlussel, Serie, Region...).
- FSC 1AA002 OEM for remove component protection MGU18/21 (only case BDC replace). - ID8.5 (SFA) conversion/ change region map. - Virgin Kafas4, MRR, RAM used. - Mgu patch, fsc custom match to vin, remove CP. - Reset ISN 7DTC, 8HP for F, G serie (include EGS7). - Write ISN MG1/MD1 with remotely. - Carplay/Android Auto MGU with/without ATM (6AE). Skype live:laquangksxd |
|||
|
|
|
08-02-2022, 05:48 AM,
(This post was last modified: 08-02-2022, 06:16 AM by vav395.)
Post: #4
|
|||
|
|||
|
RE: HU_Entry to HU_NBT Coding Help!
where could I download for better esys version or what's psdzdata version works best for F series programming?
|
|||
|
|
|
08-02-2022, 06:18 AM,
Post: #5
|
|||
|
|||
RE: HU_Entry to HU_NBT Coding Help!
 If my post helped you hit the thanks and reputation button. Thank you.  |
|||
|
|
|
08-02-2022, 07:20 AM,
Post: #6
|
|||
|
|||
|
RE: HU_Entry to HU_NBT Coding Help!
Hi,
The 3.30 works for me. Thank you guys. However, it still showed BKOMBI not KOMBI. The bluetooth streaming music from phone and aux connected using usb isn't working. |
|||
|
|
|
08-02-2022, 07:26 AM,
Post: #7
|
|||
|
|||
|
RE: HU_Entry to HU_NBT Coding Help!
It depends on what is installed. Possible the bkombi, kombi, dkombi etc.
If the car then has a bkombi, that's how it is. It won't change. If my post helped you hit the thanks and reputation button. Thank you. |
|||
|
|
|
08-02-2022, 07:38 AM,
Post: #8
|
|||
|
|||
|
RE: HU_Entry to HU_NBT Coding Help!
|
|||
|
|
|
08-02-2022, 10:09 AM,
Post: #9
|
|||
|
|||
|
RE: HU_Entry to HU_NBT Coding Help!
Bluetooth antenna connected to HU? USB and AUX wire also connected to HU?
If my post helped you hit the thanks and reputation button. Thank you. |
|||
|
|
|
08-02-2022, 17:00 PM,
Post: #10
|
|||
|
|||
|
RE: HU_Entry to HU_NBT Coding Help!
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Return to TopReturn to Content
