Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
2013 X5 35dX limp mode
30-03-2022, 01:52 AM,
Post: #1
|
|||
|
|||
2013 X5 35dX limp mode
2013 BMW X5dx car came with few errors
after error delete 2 still there 4670 and 48dd and after driving of 50 m goes to limp mode already checked wires continiuty from charging pressure sensor to ecm all ok |
|||
30-03-2022, 02:09 AM,
Post: #2
|
|||
|
|||
RE: 2013 X5 35dX limp mode
|
|||
30-03-2022, 02:18 AM,
Post: #3
|
|||
|
|||
RE: 2013 X5 35dX limp mode
(30-03-2022, 02:09 AM)2013m5 Wrote:Totally agree, check sings of corrosion, check voltage drops, usually you get continuity but current or volatege drops(30-03-2022, 01:52 AM)koziol Wrote: 2013 BMW X5dx car came with few errors |
|||
30-03-2022, 02:31 AM,
Post: #4
|
|||
|
|||
RE: 2013 X5 35dX limp mode
whats the proper voltage supply for that sensor ?
|
|||
30-03-2022, 02:35 AM,
(This post was last modified: 30-03-2022, 02:39 AM by jaramillo.)
Post: #5
|
|||
|
|||
RE: 2013 X5 35dX limp mode
You can calculate test plan and ISTA will guide you with that info
Check voltage/Current to DDE |
|||
01-04-2022, 13:09 PM,
Post: #6
|
|||
|
|||
RE: 2013 X5 35dX limp mode
I have seen a similar problem but never resolved it. All sensors and wires checked out. I did not check dde supply though because I did not have that fault.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content