[coxma2000]

I have this issue...i retrofit my BMW F10 from 2011 CIC from Bussiness to Profesional step by step,virginize,coding,changed vin,generate certificates and option is not more greyed out but when start navigation it asks for activation code,what i'm doing wrong or what is about with this code?Any answers is appreciated...

[ronaldo2002]

I have the same problem I haven't been able to solve.

[atomantmk]

If you have properly patched just use the FSC code from Notepad or probably you have used HU Toll 2.6 and now is a problem.

[coxma2000]

i used e-sys to change vin,code,sign and edit certificates,fsc codes,upgrade fsc to unit,0x1b,0x17,0x19,0x9c,0x9b,when check fsc status all appear accepted and certificates too,the problem is i dont know how to generate the activation code to start the navigation

---

I have the same problem I haven't been able to solve.

that's a mystery for me too,i struggle more than 2 weeks with this problem and yes...still no solving about this real headache

---

If you have properly patched just use the FSC code from Notepad or probably you have used HU Toll 2.6 and now is a problem.

please,be more a bit specific?what fsc code i must use from notepad and how?

---

i mention again...i don't use any tool than e-sys and virginize the cic via usb with copie.scr

[coxma2000]

I have the same problem I haven't been able to solve.

Solved,try to use newest map generator BMW CIC FSC generator ver 1,91 and i have generate a map code after 1b premuim east 2021.1 and this code are accepted and works fine now