Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ESYS doesn't find some G-series ECUs
|
30-11-2022, 14:14 PM,
Post: #1
|
|||
|
|||
ESYS doesn't find some G-series ECUs
Hey guys ! I have a problem that I encountered today. On a 2018 G30, when I press Read(ECU) in the coding section esys finds 25 ECUs, but ACSM and SAS are missing. I tried with diagnostic mode and with car running, but with no success. When I use it with another 2018 G30 it finds all of the ECUs. Any idea why that may happen?
|
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
30-11-2022, 14:23 PM,
Post: #2
|
|||
|
|||
|
RE: ESYS doesn't find some G-series ECUs
Calculate svt target and write to vcm the read ecu again
- Secure coding (NCD 2.0) fit to FA changed (Typschlussel, Serie, Region...).
- FSC 1AA002 OEM for remove component protection MGU18/21 (only case BDC replace). - ID8.5 (SFA) conversion/ change region map. - Virgin Kafas4, MRR, RAM used. - Mgu patch, fsc custom match to vin, remove CP. - Reset ISN 7DTC, 8HP for F, G serie (include EGS7). - Write ISN MG1/MD1 with remotely. - Carplay/Android Auto MGU with/without ATM (6AE). Skype live:laquangksxd |
|||
|
|
|
30-11-2022, 20:33 PM,
Post: #3
|
|||
|
|||
|
RE: ESYS doesn't find some G-series ECUs
maybe you have fault code about flexray ? if yes,try to use tool32 to open flexray ports
|
|||
|
|
|
01-12-2022, 06:57 AM,
Post: #4
|
|||
|
|||
|
RE: ESYS doesn't find some G-series ECUs
Problem is only esys?,you tried ista diagosis?
|
|||
|
|
|
01-12-2022, 09:04 AM,
Post: #5
|
|||
|
|||
|
RE: ESYS doesn't find some G-series ECUs
Check your SVT and see if you have those module in it. If not you should calculate SVT target and write it on your VCM. After that open ports with tool32 and initialize flexray.
|
|||
|
|
|
15-12-2022, 12:07 PM,
Post: #6
|
|||
|
|||
RE: ESYS doesn't find some G-series ECUs
(30-11-2022, 14:23 PM)laquangksxd Wrote: Calculate svt target and write to vcm the read ecu again This helped and now I am seeing the ACSM5 module, but I still don't see the SAS2 module. The car is 2018 G30 540d and has the driver assist plus. Is it possible that it doesn't have an SAS module and has some different module instead ? |
|||
|
|
|
15-12-2022, 22:10 PM,
Post: #7
|
|||
|
|||
|
RE: ESYS doesn't find some G-series ECUs
you need to open flexray ports and reinitialize it.
MGU(ID7, ID8) Patching/Virginizing.
Feature Installer codes. KAFAS4 Virginizing. Physical head unit Repairs. CarPlay activations(EVO,ENAV2,MGU). Remote BMW Coding.  [email protected] |
|||
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
