Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VNCI 6154A Clone experience
21-04-2023, 19:40 PM,
Post: #11
|
|||
|
|||
RE: VNCI 6154A Clone experience
(21-04-2023, 18:57 PM)smtncr001 Wrote:Hi, answering your first question I have only set up this tool and havent tried it yet on newer vehicles. I will try to get to try it on the new vehicles and report back(20-04-2023, 22:04 PM)andriusx Wrote: Hello members and answer to your second question you can not just use odis 11 post setup with odis 7.2.1 it has to be modified if at all it can be modified to suit 7.2.1 version |
|||
22-04-2023, 08:23 AM,
Post: #12
|
|||
|
|||
RE: VNCI 6154A Clone experience
Hi, much interesting will test after long time to test disconnections. The old yellow crap had these disconnects quite often.
|
|||
05-06-2023, 14:11 PM,
Post: #13
|
|||
|
|||
RE: VNCI 6154A Clone experience
Anyone can send license.dat for VNCI6154A for Odis10 ? Cant download from china site ...
|
|||
05-06-2023, 15:25 PM,
Post: #14
|
|||
|
|||
RE: VNCI 6154A Clone experience
|
|||
05-06-2023, 19:22 PM,
Post: #15
|
|||
|
|||
RE: VNCI 6154A Clone experience
|
|||
06-06-2023, 07:07 AM,
(This post was last modified: 06-06-2023, 07:08 AM by Versus.)
Post: #16
|
|||
|
|||
RE: VNCI 6154A Clone experience
(05-06-2023, 19:22 PM)error_free2003 Wrote:(05-06-2023, 15:25 PM)Versus Wrote:(05-06-2023, 14:11 PM)error_free2003 Wrote: Anyone can send license.dat for VNCI6154A for Odis10 ? Cant download from china site ... You can use any odis. |
|||
07-06-2023, 11:16 AM,
Post: #17
|
|||
|
|||
RE: VNCI 6154A Clone experience
Greetings, I recently tried to connect a friend with his Original Odis, and it appeared as if he was updating the firmware (that is, as if he understood that we had connected an original 6154), but it stayed at 0%..and did not let Do nothing. Later, it was left without connection and I had to update from another PC with its VNCI program, that is, in short, every time a new firmware for the Original VAS 6154 comes out, it must be updated (if they have it), the VNCI from its program..
MORKAS
|
|||
07-06-2023, 15:30 PM,
Post: #18
|
|||
|
|||
RE: VNCI 6154A Clone experience
Sorry,
but the red VNCI which i use make the update automatik from the odis D-PDU API its load the 24.0 or 24.1 or 25 or 26 now from the ODIS 11 I only connect 1 times to change the Serial. nothing else there is nothing on the page to load license |
|||
07-06-2023, 16:17 PM,
Post: #19
|
|||
|
|||
RE: VNCI 6154A Clone experience
(07-06-2023, 15:30 PM)kiranabc Wrote: Sorry, you mixed up two different points. the VNCI have it's own firmware (firmware currently 1.0.7.1) . these have nothing to do with PDUAPI firmware of o.d.i.s (currently 26.2). If my post help or is usefull for you, don't forget to press and
|
|||
07-06-2023, 18:57 PM,
Post: #20
|
|||
|
|||
RE: VNCI 6154A Clone experience
yes but you dont have to change or update it,
we didnt update the firmware we just change the serial and we work with 24 and 26 best regards |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
4 Guest(s)
4 Guest(s)
Return to TopReturn to Content