Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

No Feedback Given PCR2.1 - stage 1 dpf off
05-06-2023, 20:12 PM,
Post: #1
ZTAudi  PCR2.1 - stage 1 dpf off
hi

i need strong stage 1 and complete DPF decoding in audi a3 1.6 TDI simos PCR2.1

map from VR reading


HW: CAYC
SW: 03L906023PQ
SW upg.: 03L906023PQ 9978
Installation: R4 1.6l TDI


Attached Files
VR_PCR2.1_Audi_A3_1.rar
File Type: .rar
Downloaded: 15 times
Size: 711.14 KB


like my post and the content i share, give me a +1 recommendation and a thanks = [Image: postbit_reputation.gif] [Image: tyl_add.png]
Quote this message in a reply
05-06-2023, 22:19 PM,
Post: #2
RE: A3 1.6 TDI - stage 1 dpf off
(05-06-2023, 20:12 PM)CenturionM Wrote:  hi

i need strong stage 1 and complete DPF decoding in audi a3 1.6 TDI simos PCR2.1

map from VR reading


HW: CAYC
SW: 03L906023PQ
SW upg.: 03L906023PQ 9978
Installation: R4 1.6l TDI

hi
here it is your file
add thx and rep pls


Attached Files
WinOLS ( ori (stage 1 dpf egr) - SM2G0P2000000).rar
File Type: .rar
Downloaded: 10 times
Size: 710.46 KB

Reputation: +1 - CenturionM [+1]
Quote this message in a reply
[+] 1 user says Thank You to DavidT for this post
11-06-2023, 19:25 PM,
Post: #3
RE: A3 1.6 TDI - stage 1 dpf off
(05-06-2023, 22:19 PM)DavidT Wrote:  
(05-06-2023, 20:12 PM)CenturionM Wrote:  hi

i need strong stage 1 and complete DPF decoding in audi a3 1.6 TDI simos PCR2.1

map from VR reading


HW: CAYC
SW: 03L906023PQ
SW upg.: 03L906023PQ 9978
Installation: R4 1.6l TDI

hi
here it is your file
add thx and rep pls


on the dashboard, information about DPF full is displayed, resetting the DPF did not help


what is the problem?

like my post and the content i share, give me a +1 recommendation and a thanks = [Image: postbit_reputation.gif] [Image: tyl_add.png]
Quote this message in a reply
11-06-2023, 19:35 PM,
Post: #4
ZTAudi  PCR2.1 DPF problem
hi

on the dashboard of the car in the middle part there is still information about the DPF filled, I tried to reset the DPF, but it did nothing, I don't know what the problem is, maybe the map was written incorrectly

no DTC errors

I restored the original map and tried to clear the fill - no result

could someone correct the map and check it for the correct disabling of the DPF and the correct strong stage 1?


Attached Files
WinOLS ( ori (stage 1 dpf egr)_chk_ok.rar
File Type: .rar
Downloaded: 7 times
Size: 710.35 KB

VR_PCR2.1_Audi_A3_1_ORI_MAPS.rar
File Type: .rar
Downloaded: 7 times
Size: 711.14 KB


like my post and the content i share, give me a +1 recommendation and a thanks = [Image: postbit_reputation.gif] [Image: tyl_add.png]
Quote this message in a reply
11-06-2023, 19:50 PM,
Post: #5
RE: PCR2.1 DPF problem
in a3 dpf soot is also stored in the dashboard , you can try reset it with vcds for example , but mainly need make succesfull regeneration on ori file for dpf lamp off then write mod


Quote this message in a reply
11-06-2023, 19:52 PM,
Post: #6
RE: PCR2.1 DPF problem
(11-06-2023, 19:50 PM)Buszkin Wrote:  in a3 dpf soot is also stored in the dashboard , you can try reset it with vcds for example , but mainly need make succesfull regeneration on ori file for dpf lamp off then write mod

I restored the original map and tried to clear the fill - no result ... or I did something wrong ... I have no idea ...

like my post and the content i share, give me a +1 recommendation and a thanks = [Image: postbit_reputation.gif] [Image: tyl_add.png]
Quote this message in a reply
11-06-2023, 20:10 PM,
Post: #7
RE: PCR2.1 DPF problem
You dont understand , reset Dpf Is not enought , you need perform succesfull regeneration


Quote this message in a reply
[+] 2 users say Thank You to Buszkin for this post
11-06-2023, 20:28 PM, (This post was last modified: 11-06-2023, 20:57 PM by CenturionM.)
Post: #8
RE: PCR2.1 DPF problem
(11-06-2023, 20:10 PM)Buszkin Wrote:  You dont understand , reset Dpf Is not enought , you need perform succesfull regeneration

i.e. restore ori map via Odis E?


what is the best way to regenerate and everything step by step? Odis S or VCDS?

ok i will restore the odis E map and try the odis S to do what was written above, because VCDS can't handle it

like my post and the content i share, give me a +1 recommendation and a thanks = [Image: postbit_reputation.gif] [Image: tyl_add.png]
Quote this message in a reply
12-06-2023, 18:02 PM,
Post: #9
RE: PCR2.1 DPF problem
(11-06-2023, 20:28 PM)CenturionM Wrote:  
(11-06-2023, 20:10 PM)Buszkin Wrote:  You dont understand , reset Dpf Is not enought , you need perform succesfull regeneration

i.e. restore ori map via Odis E?


what is the best way to regenerate and everything step by step? Odis S or VCDS?

ok i will restore the odis E map and try the odis S to do what was written above, because VCDS can't handle it


Before writing mod file i did regen dpf and soot reset with vcds, then flash with modded and all should be fine.
With odis you have guided procedure for barely everything.
Br

[Image: ldpaoub209f.png]

Quote this message in a reply
12-06-2023, 21:37 PM,
Post: #10
RE: PCR2.1 DPF problem
(12-06-2023, 18:02 PM)blackTDI Wrote:  
(11-06-2023, 20:28 PM)CenturionM Wrote:  
(11-06-2023, 20:10 PM)Buszkin Wrote:  You dont understand , reset Dpf Is not enought , you need perform succesfull regeneration

i.e. restore ori map via Odis E?


what is the best way to regenerate and everything step by step? Odis S or VCDS?


ok i will restore the odis E map and try the odis S to do what was written above, because VCDS can't handle it


Before writing mod file i did regen dpf and soot reset with vcds, then flash with modded and all should be fine.
With odis you have guided procedure for barely everything.
Br

I don't know what's going on, but I can't do this


the problem is filling the diesel particulate filter with a volume of 70g

could it be a problem that the DPF was just thrown away?



I tried to carry out these activities in vcds, but I do not know how to manually reset the volume from measuring blocks because in this driver the measuring blocks for the ECU are unavailable (the button does not work)


does anyone have a step by step tutorial on how to fix this problem?

like my post and the content i share, give me a +1 recommendation and a thanks = [Image: postbit_reputation.gif] [Image: tyl_add.png]
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Bmw 6hp stage 1 hero3838 0 25 4 hours ago
Last Post: hero3838
ZTAudi Audi A7 3.0 tdi CRTD stage 1 zmudzik86 2 84 Yesterday, 23:06 PM
Last Post: Hazerssmurf
  Solved ✔ Nissan Navara 2017 sid310 stage 1 please ROD-BENDERS 2 102 Yesterday, 18:44 PM
Last Post: ROD-BENDERS
  hello need stage 1 safe and egr off mkii 2 55 14-06-2024, 04:48 AM
Last Post: mkii
KOpel Opel Meriva A Stage 1 spawn2 2 66 13-06-2024, 19:24 PM
Last Post: spawn2
PCitroen Citroen C4 2005y 1.6 HDI 9HX 90PS EDC16C34 Max Power Stage 1 atmpitbull 1 27 13-06-2024, 17:05 PM
Last Post: rece1p23
XZBMW Stage 1 Check/correction Lev 3 96 13-06-2024, 10:07 AM
Last Post: Lev
  stage 1 mercedes delphi crd11 CenturionM 1 36 13-06-2024, 08:07 AM
Last Post: 57Tuning
KOpel Hy,please help Opel vivaro 1.9dci edc15c3 stage 1 and egr off need Durba 1 69 12-06-2024, 11:11 AM
Last Post: ecutech123
  need stage old Sharan bimkinas 1 39 12-06-2024, 10:36 AM
Last Post: ecutech123

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content