[Stopro92]

Maybe this will help.

Adaptation of Carbon Mass (after DPF Replacement)
Prerequisites:
Ignition ON
Engine OFF
[Security Access -16]
Enter the code shown in the VCDS pop-up balloon for "Adaptation Enabling"
[Do It!]
[Adaptation - 10]
From the pulldown menu, select the entry for "Carbon Mass (DPF Replacement)" or "[*IDE00275*] Particle filter initialization".
If those channels are not available look for [*IDE07903*] Adaptation of ash mass.
Save a new value of 1 to reset the learned Carbon Mass. It's normal for that value to automatically change to 0 after it has been successfully saved. Check and clear fault codes to make sure none are present.

[Jurebv]

update to newer sw version with odis, then on this version make resets, make new dpfoff