Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ EEC-V 8 keys programmed - No start
06-07-2023, 06:43 AM,
Post: #11
|
|||
|
|||
RE: EEC-V 8 keys programmed - No start
|
|||
06-07-2023, 08:21 AM,
Post: #12
|
|||
|
|||
RE: EEC-V 8 keys programmed - No start
Try this bring new eeprom and write on it the new file from your friend and read and compare few times if all ok
put in ecu and ecu in car and turn ign on and test with forscan if not solve , remove eeprom and reread to compare if the file not good mean you need ecu as our collegue sixcode mention regards Always new stuff to learn
Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
Reputation: +1 - dabaca [+1] | |||
07-07-2023, 11:28 AM,
Post: #13
|
|||
|
|||
RE: EEC-V 8 keys programmed - No start
(06-07-2023, 08:21 AM)raffy haddad Wrote: Try this bring new eeprom and write on it the new file from your friend and read and compare few times if all ok I did that, even with bin file with only 2 keys programmed, forscan keeps saying that the car have 8 keys programmed. I will replace the ecu, I'd like some advice on which ecu would be compatible, because the car is quite old and here, the same ecu model is being sold for 150-200€ But I see other ecu models, with the same 60 pin connector, EEC-V and from 1.6L engine, for only 20-30€ I was thinking on giving it a try, as there is notable difference in price My ecu: 2ANB 1M5F-12A650-BF LP4-335 Te other I found: BACA 1S5F-12A650-AB LP4-322 There is chance of working? With Forscan pairing 2 working keys |
|||
10-07-2023, 06:20 AM,
Post: #14
|
|||
|
|||
RE: EEC-V 8 keys programmed - No start
It gives the 8 key error when the resistors are broken measure the resistors
|
|||
13-07-2023, 19:22 PM,
Post: #15
|
|||
|
|||
RE: EEC-V 8 keys programmed - No start
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content