[Modded e30]

IZGOY

How did u get it working in windows 7? The image comes with windows xp?

[TizWoz]

IZGOY

How did u get it working in windows 7? The image comes with windows xp?

you need to take some files from windws xp version, install windows 7 and then add the files to the windows 7

very easy....if you know what your doing.....very hard if not.

[Modded e30]

IZGOY

How did u get it working in windows 7? The image comes with windows xp?

you need to take some files from windws xp version, install windows 7 and then add the files to the windows 7

very easy....if you know what your doing.....very hard if not.

Sounds good, what are these files on OS drive sure? What about registry?

Can u help me doing this setup? I gave up with image restoration on the IBM.

[Modded e30]

How to run ista-p and d manually? I closed it manually, then I tried to run it without restarting OS, it doesn't run from wsm agent.

One more thing, for what ediabas in C drive installed?

[miranri]

ISTA/P 2.52.40 how to change to English default language ,,,

[Modded e30]

Anyway thanks,, great thread.

[Wesk18]

I got it working, i renamed my local network to eth0, i notice the programs partition letter was set to E: I changed it to P: went to services and started the wsm services, the program launched without any issues. i still need to try it and see if it can detect my icom and car

p.s

I restored this on a clean hdd using acronis and i even created a vmware out of this tib file, both working.

[Modded e30]

I got it working, i renamed my local network to eth0, i notice the programs partition letter was set to E: I changed it to P: went to services and started the wsm services, the program launched without any issues. i still need to try it and see if it can detect my icom and car

p.s

I restored this on a clean hdd using acronis and i even created a vmware out of this tib file, both working.

What car u r going to test with? Can you try it on e36 if possible?

[Wesk18]

I got it working, i renamed my local network to eth0, i notice the programs partition letter was set to E: I changed it to P: went to services and started the wsm services, the program launched without any issues. i still need to try it and see if it can detect my icom and car

p.s

I restored this on a clean hdd using acronis and i even created a vmware out of this tib file, both working.

What car u r going to test with? Can you try it on e36 if possible?

I've tested it on a e90 i was able to update the software, when i get a chance i'll test my brother's e36, my other brother has a e46 i can test on that one as well.

---

BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image

New diagnostic system of BMW vehicles. It works with E and F series. BMW Rheingold is the replacement of the diagnostic program
BMW ISTA/D versions 2.XX. At this time, supplies to the official dealer services.

The programming system ISTA/P is an application of ISPI network. With ISTA/P you can do coding, programming and replacement of control units.

Date: 03/2014
Version: D3.42.40 & P2.52.40
System requirements: Dual-core processor, min. RAM 4GB
Language: Multilanguage

can this be upgradeable ?

[Modded e30]

Wesk18, it works well on e46 and e60, tested today..I had issues with the obd cable, fixed.