Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
CCC flash WINKFP ICOM
|
29-03-2024, 08:56 AM,
(This post was last modified: 29-03-2024, 08:57 AM by BimmerSLO.)
Post: #1
|
|||
|
|||
|
CCC flash WINKFP ICOM
Hello
I have an issue with flashing E90 CCC to E60 CCC software with WINKFP & EasyConnect 62 - CC6260 - MostGW - K-line (Finishes OK, no problem) 9185627 3F - CC3F60 - ASK - Most async (Finishes OK, no problem) 9185549 47 - CC4760 - ANT - Most async (Finishes OK, no problem) 9185625 67 - CC6360 - BO - Most async (error 7042 Programming mode started - no answer from ECU (IFH-0009) but gateway o.k.) 9185623 A0 - CCA060 - CCC-A - Most async (error 7042 Programming mode started - no answer from ECU (IFH-0009) but gateway o.k.) 9193872 At first I used original ICOM NEXT + ICOM NEXT B MOST adapter. Then I tried with original ICOM A1 + orange ICOM B MOST adapter. Same problem with both setup. I am flashing this on bench. Bench consists of SGM-SIM module for gateway and OBD socket and of course CCC head unit. Any help? Coding E + F Modelles in near from Graz, Austria
Navigation map updates I-Step update CIC, NBT, NBT EVO Retrofit and remote coding |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
29-03-2024, 09:11 AM,
Post: #2
|
|||
|
|||
|
RE: CCC flash WINKFP ICOM
Dead unit if 009
|
|||
|
|
|
29-03-2024, 09:34 AM,
(This post was last modified: 29-03-2024, 10:10 AM by Stratofortress.)
Post: #3
|
|||
|
|||
|
RE: CCC flash WINKFP ICOM
The IFH-0009 error indicates the system is unable to communicate with the HU, which is potential result of a corrupted boot loader.
Can you perform SG_RESET with NCS for the unit? Can you communicate with the unit with Tool32? If yes, then you could make a new attempt with different diagnosis protocol in communication menu to KWP2000, if it makes any difference? Have you tried NFS Emergency Flash already? Click Thanks and Reputation
![[Image: under.gif]](https://cartechnology.co.uk/images/smilies/under.gif) if this post helped you. |
|||
|
|
|
29-03-2024, 09:49 AM,
Post: #4
|
|||
|
|||
|
RE: CCC flash WINKFP ICOM
likely a faulty motherboard CCC.
|
|||
|
|
|
29-03-2024, 09:53 AM,
Post: #5
|
|||
|
|||
RE: CCC flash WINKFP ICOM
(29-03-2024, 09:11 AM)zero9 Wrote: Dead unit if 009 Not dead. If I insert repair CD, I can get unit back to life. But not on the latest E60 software. Coding E + F Modelles in near from Graz, Austria
Navigation map updates I-Step update CIC, NBT, NBT EVO Retrofit and remote coding |
|||
|
|
|
29-03-2024, 10:57 AM,
Post: #6
|
|||
|
|||
|
RE: CCC flash WINKFP ICOM
|
|||
|
|
|
29-03-2024, 11:06 AM,
Post: #7
|
|||
|
|||
|
RE: CCC flash WINKFP ICOM
If repair cd works and external flash does not, that means you have broken/degraded joint between BGA chip and PCB. Needs reballing or at the VERY least reheating. CCC on it's way to stop working completely sooner or later.
|
|||
|
|
|
29-03-2024, 12:48 PM,
Post: #8
|
|||
|
|||
|
RE: CCC flash WINKFP ICOM
Is there a repair CD for .C0C ?
Coding E + F Modelles in near from Graz, Austria
Navigation map updates I-Step update CIC, NBT, NBT EVO Retrofit and remote coding |
|||
|
|
|
29-03-2024, 13:28 PM,
Post: #9
|
|||
|
|||
RE: CCC flash WINKFP ICOM
(29-03-2024, 12:48 PM)BimmerSLO Wrote: Is there a repair CD for .C0C ? yes https://mega.nz/file/4uxRUaDJ#8YsNZ2u4j3...vnPLsefOw8 |
|||
| Reputation: +1 - BimmerSLO [+1] | |||
|
|
|
29-03-2024, 19:17 PM,
(This post was last modified: 29-03-2024, 19:20 PM by Hoborg.)
Post: #10
|
|||
|
|||
|
RE: CCC flash WINKFP ICOM
What unit HW You have ? Maybe You want to flash wrong software nr for Your HW.
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
