[Schnitzer]

Hi, 
I retrofitted in my LHD (F34 LCI) car RHD heated leather seats. Now to turn on driver (left) seat heating I must turn on passenger button. Can anyone tell coding for esys? I heard it must something changed in IHKA.

[Mefiuu92]

Hi, 
I retrofitted in my LHD (F34 LCI) car RHD heated leather seats. Now to turn on driver (left) seat heating I must turn on passenger button. Can anyone tell coding for esys? I heard it must something changed in IHKA.

change type shlussen in vo and code ihka or rem or sm2

[Schnitzer]

Thanks for your answer, can you please describe exactly how I can change it? Thanks

[filipkozina]

It can't be done by coding , on seat heating module there is ONE ground on driver seat , but it has TWO ground wires on passenger seat , now when you put seats from RHD car your passenger seat have 1 ground so car thinks it is driver seat!

Solution : Remove ground from pin 1 on driver side , add ground to pin 1 on passenger side
Everything will work good like it should. Done a lot of them.

[grizzle]

You need switching sides of yellow underseat connectors. The Right one should be under passenger seat.Thats mean additional GND and remove other seat