[pepi]

I cant reset Adblue with Xentry , it request online connection for it .
I have this fault codes 
P30055F Communication failure with NOX sensor downstream of SCR catalytic ...
P300685 The starter was disabled by exhaust aftertreatment system
P30066D AdBlue sytem Warning stage 3: Starting engine is not possible due to fault in adblue system
P300656 Consequential fault : The emision limit for the NOX concentration  has been exceeded 
P300964
P300965
Now I got " Emer. oper. 20km/h No start in : 0km
I want to disable SCR but before I do that I need to reset it inn stock file.

Can someone describe step by step reseting with Vediamo please ?

[mercis]

SCRCM:
1. Init Contact
2. DJ_Zugriffsberechtigung_Drive
3. DL_End_of_Line_Task_Inducementsystem
4. ECU reset / Ignition OFF/ON
5. Read Faults Codes

ECU
1. Init Contact
2. DJ_Entriegelung_9A
3. DJ_Entriegelung_BC
4. DL_046C_SCRCtl_ctTampProt
5. DL_0471_End_of_LineTask_Inducement
6. ECU Reset / Ignition OFF/ON
7. Read Fault Codes

[pepi]

I can read the ecu and fault codes but I have this error when trying DJ_Entriegelung_9A
Do you know what can it be ?

[ross2018]

You need to unlock the ecu first.

[kobservice]

Need help on CR43 Adblue reset with Vediamo

Hardware 651 901 40 01 Bosch 11/14 000
Software 651 902 01 02 Bosch 14/12 000
Software 651 903 11 37 Bosch 14/47 000
Boot software 651 904 04 01 Bosch 11/14 000
Diagnosis identifier 020B07 Control unit variant CR43_Diag_07h

Fault
P13E400 The remaining driving distance is limited due to a malfunction in the AdBlue® system.

P2BA9FD The emission limit for the NOx concentration has been exceeded (AdBlue® quality is too low).
   


Yours sincerely, Kobservice

[BabeH]

I can read the ecu and fault codes but I have this error when trying DJ_Entriegelung_9A
Do you know what can it be ?

what happen when you initiate "DJ_Zugriffsberechtigung_Drive" ?

you are using vxdiag C6 ?

[W211]

All cartechnology members gets free adblue reset from me. Send me pm and i will gladly help. But only for active and good members. Need good internet speed, no need for any special files for this purpose. Files are located inside xentry folder if needed!

[kobservice]

I'm looking for SMR-D CR43 Adblue reset