Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DIGIPROG 3 user help thread !
08-08-2015, 10:47 AM,
Post: #181
|
|||
|
|||
RE: DIGIPROG 3 user help thread !
I've done a 2009 audi tt, but 2010 is facelift.. probably digiprog won't do it.. and it's not even listed in xtool..
and many audi's from 2010-2012 need to have eeprom prepared. maybe someone else tried? |
|||
12-08-2015, 10:55 AM,
Post: #182
|
|||
|
|||
![]()
Caddy 2013 - 2014 By OBD
![]() Golf 6 Mutch 2011 By OBD ![]() Kia Picunto 2006 By Chip ![]() Kia Tucson 2004 By Chip ![]() Aveo 2009 - 2010 - 2011 By Chip ![]() Passat 2003 By OBD ![]() Dpf,AdBlue,Egr,Dtc,Tuning. Full solution for KESS, K-TAG and TRASDATA, K-tag upg fr fw: 5.001 to fw: 6.070 Including Trasdata / Kess v2 upg fr fw: 3.099 to fw: 4.036 Service files 100% guaranteed available
|
|||
Reputation: +1 - pietje001 [+1] | |||
16-08-2015, 20:39 PM,
Post: #183
|
|||
|
|||
RE: DIGIPROG 3 user help thread !
Chevrolet Aveo 2008 by Chip 93C56 OK
Peugeot 307 2006 BSI JC by chip 95128 OK DASH JC by chip 95020 OK DACIA LOGAN by chip 93C56 ok Envoyé de mon ASUS_T00J en utilisant Tapatalk Dpf,AdBlue,Egr,Dtc,Tuning. Full solution for KESS, K-TAG and TRASDATA, K-tag upg fr fw: 5.001 to fw: 6.070 Including Trasdata / Kess v2 upg fr fw: 3.099 to fw: 4.036 Service files 100% guaranteed available
|
|||
17-08-2015, 08:40 AM,
Post: #184
|
|||
|
|||
RE: DIGIPROG 3 user help thread !
Hi,
i´m trying to change mileage on a Opel Combo C (2011). I use Digiprog 3 Vers. 4.94 and i tried the Opel Corsa Diagnostic OBD2 but it don´t work. So i guess i have to try it with Corsa 35080. Do i need anything else than the digiprog3 maschine and the cable (ST somewhat i guess)? Has anyone done it on this cars before? Thank you |
|||
17-08-2015, 08:54 AM,
Post: #185
|
|||
|
|||
RE: DIGIPROG 3 user help thread !
You do it via obd. It should bring up questions mark. When you type in the new mileage, as soon as you click the tick, hold the trip button down. Keep holding it till digi says check written value. Then release trip button. Remove battery negative for 10 secs then replace and new mileage should appear
Stop getting worried about what could go wrong, and start getting excited about would could go right!
hmmmmmmm........eeprom!!! Digi v4.94, Xtool, R260, R270, Smok, VagProg DataSmart 3+ Smelecom, Autel Maxisys ms908 ![]() |
|||
Reputation: +1 - pietje001 [+1] | |||
17-08-2015, 09:02 AM,
Post: #186
|
|||
|
|||
RE: DIGIPROG 3 user help thread !
Ok, thanks so far.... i´ve tried it like you said but it didnt work... maybe i´ve made a mistake... i´ll try again...
do i understand it right, that there are 2 ways to change mileage on a opel corsa: first via diagnostic and second directly by manipulating the chip? thanks... |
|||
17-08-2015, 09:04 AM,
Post: #187
|
|||
|
|||
RE: DIGIPROG 3 user help thread !
No, 35080 chip is on the corsa D
Stop getting worried about what could go wrong, and start getting excited about would could go right!
hmmmmmmm........eeprom!!! Digi v4.94, Xtool, R260, R270, Smok, VagProg DataSmart 3+ Smelecom, Autel Maxisys ms908 ![]() |
|||
17-08-2015, 09:08 AM,
Post: #188
|
|||
|
|||
RE: DIGIPROG 3 user help thread !
Go to diag menu: AUTO - OPEL - CORSA - DIAG
give new mileage (don't press 'V' yet!) press the button of the dashboard (trip meter) and hold button! enter the new mileage (press 'V') (still hold dashboard button) wait until digiprog says ' check written value' release dashboard button. disconnect car battery for 30sec. |
|||
17-08-2015, 09:25 AM,
Post: #189
|
|||
|
|||
RE: DIGIPROG 3 user help thread !
Ok, i will try it today afternoon...
thanks so far |
|||
17-08-2015, 14:34 PM,
Post: #190
|
|||
|
|||
RE: DIGIPROG 3 user help thread !
It works! thank you again
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
14 Guest(s)
14 Guest(s)
Return to TopReturn to Content