Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DiagBox v7.77
21-09-2015, 03:47 AM,
Post: #1
|
|||
|
|||
DiagBox v7.77
Upgrade to DiagBox v7.77 (if you have upgraded to 7.76)
Please notice that this is intended for experimental or educational purposes and that you perform any or all the below procedures at your own risk. I hold no responsibility for any issue you may face. Procedure (Off-line Update): 1- Navigate to C:\AWRoot\bin\fi\ and create another copy of "cashe" folder (with all its contents) naming it cashe.org. 2- Download the attached "updt_77u.zip" file, Expand it and copy the contents of the updt_77 folder to C:\AWRoot\dtwr\updt\ directly, replacing and overwriting existing files and folders. 3- Run DiagBox, it will start the upgrade process, when it finishes successfully click OK, it will run for the first time and will give 9 or 10 error messages, keep clicking OK until DiagBox closes down. 4- Copy all 13 files that start with “fr.actia.AWF.xxxxxxx.dll” from cashe.org, into the (empty) C:\AWRoot\bin\fi\cashe\ folder. 5- Run DiagBox and it will run successfully. You can always downgrade to DiagBox 7.76 by running Maitresox’s DiagBox update 7.74 to 7.76 again. Photo below indicates the new DiagBox naming convention equivalent, 7.77 => 8.13 |