[Czozen]

Hello,

Does anyone have information how to make a desktop connection for CCC units to code/program it on bench?

i have got:
- key slot
- CAS3+ with Key from E91
- complete wiring from E87 with CCC plug and fiber cables and OBD. But it is very heavy, and i know i need only few of this cables.
- iDrive

i have found this:
https://www.dropbox.com/sh/ee2gnj1oiopmm...ection.jpg

but i do not know what is this module under CAS on this picture. Does anyone know what it is? Is this KGM module?

[inspi1981]

It's a gateway-KGM

[InAndAround]

To your list you have to add a JBE that does the work of the gateway module in the E89 series. The setup on the pictures will work for sure with a VIN of a E60/E61 etc and not with the E89 family. The best bench flashing setup would allow connection of E60 and E89 moudules.

[maho]

So all the Hardware from czozen and jbe (junction box) For a tablestation to code ccc?

Maho

[min2xx]

Hello,

Does anyone have information how to make a desktop connection for CCC units to code/program it on bench?

i have got:
- key slot
- CAS3+ with Key from E91
- complete wiring from E87 with CCC plug and fiber cables and OBD. But it is very heavy, and i know i need only few of this cables.
- iDrive

i have found this:
https://www.dropbox.com/sh/ee2gnj1oiopmm...ection.jpg

but i do not know what is this module under CAS on this picture. Does anyone know what it is? Is this KGM module?

It's pass protected, new link please

[maho]

I bought a canbridge and it works with all ccc and cic.
In some cases just need zgw to code/update cic and nbt

BR
Maho